66103-2 TE Connectivity, 66103-2 Datasheet - Page 32

• Manufacturer Part Number: 66103-2
• Description: III+ PIN,24-20,TIN-LEAD,LP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: Type III+r

Specifications of 66103-2

• Gender: M
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Tin-Lead Over Nickel
• Product Depth (mm): 2.92mm
• Product Length (mm): 27.48mm
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Discrete Wire
• Grade: Commercial
• High Current: No
• Termination End Plating: Tin-Lead
• Pin Diameter (mm [in]): 1.57 [0.062]
• Wire Range (mm [awg]): 0.20-0.60² [24-20]
• Spring Material: Stainless Steel
• Used With: G Series Connectors, M Series Connectors, CPC Connectors
• Contact Type: Pin
• Contact Classification: Signal
• Contact Plating, Mating Area, Material: Bright Tin-Lead
• Contact Base Material: Brass
• Contact Size: 16
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.02 – 2.03 [0.040 – 0.080]
• Applies To: Wire/Cable
• Test Current (a): 13.0
• Packaging Method: Loose Piece
• Packaging Quantity: 1,000 Box/Carton
• Lead Free Status / RoHS Status: Not Compliant

The Torsional Louver Type Band was
designed as an electrical interface that
allows the transfer of high current and a
more generous tolerance between mat-
ing surfaces. A strip can be sized with
scissors in an on-site installation. They
are available for use in flat and circular
applications. A male band is used on the
outside diameter of a pin. The female
band is used on the inside diameter of
a socket.
Material — Beryllium Copper
Finish — See Tables
Dimensions are shown for reference
purposes only.
High Current Products
Louvertac Strip, Torsional Louver Type
LAO
.092 [2.27] Louver Height
Tooth Angle — 15°
Minimum Diameter — 1.75 inches
LAOG
Louver Height — See Table
Tooth Angle — 45°
Minimum Diameter — 1.75 inches
LAIA
.050 [1.27] Louver Height
Tooth Angle — See Table
Minimum Diameter — 1
Notes: 1. Product will be sold by the foot except where length is specified.
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets are
metric equivalents.
1-192004-1
1-192004-4
192002-1
192002-2
192002-3
Part No.
192004-4
192004-6
192004-8
192007-7
192008-1
Part No.
2. Suggested current limits are application dependent.
3. Additional sizes are available upon request.
1
⁄
Flat or Female
Flat or Female
Flat or Female
2
Application
inches
Flat or Female
Flat or Female
Flat or Female
Flat or Female
Flat or Female
Application
Flat or Male
Flat or Male
Specifications subject to change.
192000-2
192000-9
192001-4
Thickness
Part No.
Material
.006
.006
.010
Thickness
.15
.15
.25
Material
.004
.004
.006
.006
.006
.006
.004
.10
.10
.15
.15
.15
.15
.10
Flat or Female
Flat or Female
Application
Flat or Male
Suggested Current
Limit per inch
Suggested Current
Limit per inch
300
300
500
Thickness
150
150
250
250
250
250
150
Material
.006
.010
.006
.15
.25
.15
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Suggested Current
Limit per inch
Louver
Height
.105
2.67
.105
2.67
.110
2.79
Angle
Tooth
150
250
150
15°
45°
15°
15°
45°
15°
45°
Catalog 65141
Revised 4-01
Unplated
Unplated
Finish
Silver
Finish
Silver
Silver
Silver
Silver
Silver
Silver
Finish
Gold
Silver
Silver
Silver
31