193990-2 TE Connectivity, 193990-2 Datasheet - Page 15

• Manufacturer Part Number: 193990-2
• Description: CONTACT, SOCKET, 8AWG, CRIMP
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: Type XIIr

Specifications of 193990-2

• Gender: SKT
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Copper Alloy
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Silver Over Nickel
• Product Length (mm): 30.5mm
• Connector Type: Contact, Crimp
• Current Rating: 60A
• Contact Termination: Crimp
• Wire Size (awg): 8
• Rohs Compliant: Yes
• Contact Gender: Socket
• Insulation Support: No
• Termination Method To Wire/cable: Crimp
• Grade: Commercial
• High Current: Yes
• Wire Range (mm [awg]): 8.00² [8]
• Louvertac Band Material: Copper Alloy
• Louvertac Band Plating: Silver
• Retention Clip: With
• Retention Clip Material: Stainless Steel
• Used With: G Series Connectors, M Series Connectors, CMC (Circular Metal Connector), CPC Connectors, CMPC (Circular Multipin Connector)
• Contact Type: Socket
• Contact Classification: Power
• Contact Plating, Mating Area, Material: Silver
• Contact Base Material: Copper Alloy
• Contact Size: 8
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Test Current (a): 60.0
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant
• For Use With: G Series, CPC Connectors
• Lead Free Status / Rohs Status: RoHS Compliant part

14
The AMPOWER Multi Pin Plus
Connector is manufactured from a
modular mold that allows the finished
housing to be molded into thousands
of different contact configurations.
Standard modules are offered in 2, 3, 4
and 8 positions with contact amperages
ranging from signal to 150 amps. Pin
contacts can be installed into the Plug
Housing or the Receptacle Housing.
Socket contacts can be installed into the
Plug Housing or the Receptacle
Housing. Any combination of the mod-
ules could be selected and molded into
a one-piece housing from 1" to 6" long.
Custom modules can be designed and
molded to fit many other AMP contacts.
Dimensions shown below are the
approximate width of each module.*
The connector can be used in blindmate
drawer, wire-to-wire, wire-to-board, and
board-to-board applications.
Product Specification
108-1809
Dimensions are shown for reference
purposes only.
End Module
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards
Association,
File No. LR 39825
2-Position
9 mm Contact
Module
4-Position
3 mm Contact
Module
8-Position
Multimate Module
(Signal/Size 16
Contact)
High Current Products
AMPOWER Multi Pin Plus Connector
*For example: Using both end modules (always required) and a 2-position 9 mm contact module, a 4-position 3 mm
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets are
metric equivalents.
contact module, and two (2) 8-position signal/size 16 contact modules would produce a connector approximately
2.402 [61.0] in length (.492 [12.5] x 2 + .787 [20.0] +.315 [8.0] + .158 [4.0] x 2).
End Module
2-Position
9 mm Contact
Module
Spacer
3-Position
3 mm
AC Contact
Module
4-Position
3 mm Contact
Module
Specifications subject to change.
Spacer
End Module
3-Position
3 mm
AC Contact
Module
Plug
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Receptacle
8-Position
Multimate Module
(Signal/Size 16 Contact)
Catalog 65141
Revised 4-01
End
Module