194002-2 TE Connectivity, 194002-2 Datasheet - Page 15

• Manufacturer Part Number: 194002-2
• Manufacturer: TE Connectivity

Specifications of 194002-2

• Product Type: Connector
• Product Line: Universal MATE-N-LOK II
• Connector Type: Header
• Color: White
• Pcb Mount Alignment: With
• Mount Angle: Vertical
• Mating Retention Type: Detent Lock
• High Current: Yes
• Current Rating (a): 19
• Voltage (vac): 600
• Termination Method: Solder
• Termination Post Length (mm [in]): 5.21 [0.205]
• Row-to-row Spacing (mm [in]): 6.35 [0.250]
• Centerline (mm [in]): 6.35 [0.250]
• Number Of Positions: 6
• Mating Retention: With
• Contact Diameter (mm [in]): 0.99 [0.039]
• Contact Type: Pin
• Contact Layout: Double-Row
• Contact Termination Type: Through Hole
• Contact Plating, Mating Area, Material: Silver
• Contact Base Material: Copper Alloy
• Sealable: No
• Connector Style: Plug
• Housing Material: Nylon
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Pcb Thickness, Recommended (mm [in]): 3.18 [0.125]
• Packaging Method: Bulk
• Lead Free Status / RoHS Status: Compliant

14
The AMPOWER Multi Pin Plus
Connector is manufactured from a
modular mold that allows the finished
housing to be molded into thousands
of different contact configurations.
Standard modules are offered in 2, 3, 4
and 8 positions with contact amperages
ranging from signal to 150 amps. Pin
contacts can be installed into the Plug
Housing or the Receptacle Housing.
Socket contacts can be installed into the
Plug Housing or the Receptacle
Housing. Any combination of the mod-
ules could be selected and molded into
a one-piece housing from 1" to 6" long.
Custom modules can be designed and
molded to fit many other AMP contacts.
Dimensions shown below are the
approximate width of each module.*
The connector can be used in blindmate
drawer, wire-to-wire, wire-to-board, and
board-to-board applications.
Product Specification
108-1809
Dimensions are shown for reference
purposes only.
End Module
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
Certified by Canadian
Standards
Association,
File No. LR 39825
2-Position
9 mm Contact
Module
4-Position
3 mm Contact
Module
8-Position
Multimate Module
(Signal/Size 16
Contact)
High Current Products
AMPOWER Multi Pin Plus Connector
*For example: Using both end modules (always required) and a 2-position 9 mm contact module, a 4-position 3 mm
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets are
metric equivalents.
contact module, and two (2) 8-position signal/size 16 contact modules would produce a connector approximately
2.402 [61.0] in length (.492 [12.5] x 2 + .787 [20.0] +.315 [8.0] + .158 [4.0] x 2).
End Module
2-Position
9 mm Contact
Module
Spacer
3-Position
3 mm
AC Contact
Module
4-Position
3 mm Contact
Module
Specifications subject to change.
Spacer
End Module
3-Position
3 mm
AC Contact
Module
Plug
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Receptacle
8-Position
Multimate Module
(Signal/Size 16 Contact)
Catalog 65141
Revised 4-01
End
Module