5055556-9 TE Connectivity, 5055556-9 Datasheet - Page 56

• Manufacturer Part Number: 5055556-9
• Manufacturer: TE Connectivity
• Type: Power Tapr

Specifications of 5055556-9

• Gender: F
• Body Orientation: Straight
• Housing Material: Nylon
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 10
• Current Rating (max): 25/ContactA
• Pitch (mm): 2.54mm
• Contact Material: Copper Alloy
• Operating Temp Range: -55C to 85C
• Mounting Style: Through Hole
• Termination Method: Solder
• Contact Plating: Bright Tin
• Product Depth (mm): 10.16mm
• Product Length (mm): 12.7mm
• Profile: Low
• Insulation: Yes
• Pcb Mounting Orientation: Vertical
• Footprint (mm [in]): 7.62 x 2.54 [.300 x .100]
• Screw Size: M4
• Screw Material: Steel
• Current Rating (a): 25
• Faston Tab: Without
• Screw: With
• Louvertac Band: Without
• Number Of Positions: 10
• Contact Configuration: ACTION PIN Post, High Current
• Action Pin Material: Copper Alloy
• Action Pin Plating: Bright Tin
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Pcb Thickness, Recommended (mm [in]): 1.57 – 3.18 [0.062 – 0.1251]
• Lead Free Status / RoHS Status: Compliant

Product Facts
I
I
I
I
I
I
I
I
I
■
I
For more information,
request Catalog 1308885.
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Certified by Canadian
Standards Association,
File No. LR7189
Rated to 600 VAC (RMS)
Flame retardant housings
94V-0
Housings, adapters, and
power terminals keyed for
proper assembly
Stackable housings provide
easy wire routing and neat
wire dressing
Built-in interlocking
features better resist shock
and vibration
Usable as in-line connector,
or as panel and surface-
mount connector
Available in six different
colors for circuit coding
and identification
Choice of two power
terminals accommodates
10-12 AWG and 14-16-18
AWG conductors
Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E28476
VDE Registered #5133
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
R
R
Power Connectors & Interconnection Systems
AMPINNERGY Wire-To-Wire Connectors
AMPINNERGY wire-to-wire
(WTW) Connectors provide
a reliable and efficient
means of interconnecting
conductors employed to
carry up to 600 VAC in
power circuits or networks.
The WTW connectors con-
sist of mating hermaphro-
ditic, flame retardant
polycarbonate housings
into which customer termi-
nated power contacts are
inserted. Stackable in four
directions through the use
of molded interlocking key-
ways, the connectors make
wire routing and dressing
orderly and easy to accom-
plish. More importantly, the
built-in interlocking features
on the connectors and the
accessory mounting
adapters provide better
resistance to the effects of
shock and vibration, keep-
ing the interconnect more
stable and secure.
The design features of the
WTW connector make it
easily applicable to free-
hanging, surface mounted
or panel mounted applica-
tions. By simply sliding the
accessory mounting
adapters into the molded
keyways of the connector
housing, a free-hanging
connector can be trans-
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
formed into a surface-
mount connector or a
panel-mount connector.
Customer supplied 8-32
screws and nuts may be
used to secure the connec-
tors configured with the
mounting adapters to
printed circuit boards or
distribution panels. The
same hardware may be
used to secure the connec-
tors to pre-cut openings in
the panels.
Furthermore, WTW connec-
tor housings, mounting
adapters and power termi-
nals are all provided with
alignment or keying fea-
tures that make it difficult to
improperly assemble and
apply the connector.
Alignment slots and tabs
on the plastic connector
housings provide for easy
mating of the housings,
even in the dark! Mounting
adapters have a keyway on
one side and a key on the
other side providing for
easy assembly to the con-
nector by touch alone if
necessary. And the power
terminals have a side tab
that helps prevent the
incorrect insertion of the
terminated conductor into
the housing. Once
inserted, the contacts
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
firmly latch within the con-
nector housing.
The WTW connector sys-
tem is available in six dif-
ferent and distinctive colors
which makes circuit differ-
entiation and identification
possible. The crimped
power terminals will
accommodate either
10-12 AWG or 14-16-18 AWG
stranded conductors.
Depending upon the con-
ductor size and the num-
ber of conductors in the
connector configuration,
the current rating ranges
from 10 Amps to 55 Amps.
Technical Documents
Product Specification
108-1373 AMPINNERGY WTW
Connectors
Application Specification
114-6051
Instruction Sheets
408-3277 AMPINNERGY Wire-To-Wire
Stackable Connectors
408-3198 Inspection of AMPINNERGY
System Power Contacts
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
117