12 SMA-50-0-110 / 111 NE Huber + Suhner AG, 12 SMA-50-0-110 / 111 NE Datasheet - Page 3

• Manufacturer Part Number: 12 SMA-50-0-110 / 111 NE
• Manufacturer: Huber + Suhner AG

Specifications of 12 SMA-50-0-110 / 111 NE

• Lead Free Status / RoHS Status: Supplier Unconfirmed

1) Value considers maximum load of the cables without irreversible variations of specifications.
Some connectors may have a specification that differs from the above mentioned data.
The products are designed and guaranteed to pass the above mentioned test procedures. Any
additional or different requirement arising from specific applications or environmental conditions
which is not covered by these test procedures is subject to request.
MATERIAL DATA
CONNECTOR PART
Bodies, outer contacts
Pin contacts
Socket contacts
Crimp ferrules
Insulators
Gaskets
MECHANICAL DATA
Recommended coupling nut torque
Coupling nut retention force
Contact captivation
- axial
Cable retention force
Durability (matings)
ENVIRONMENTAL DATA
Temperature range
Climatic category
Thermal shock
Moisture resistance
Corrosion
Vibration
Shock
1)
MIL-C-39012
3.25
3.12
TEST CONDITIONS
– 65 C ... + 165 C / – 85 F ... + 329 F
IEC
MIL-STD-202, Method 107, Condition B
MIL-STD-202, Method 106
Saltspray test acc. to MIL-STD-202, Method 101, Condition B
MIL-STD-202, Method 204, Condition D
MIL-STD-202, Method 213, Condition I
MATERIAL
copper-beryllium alloy
stainless steel
brass
spring bronze
copper-beryllium alloy, brass
copper-beryllium alloy
spring bronze
copper, brass
PTFE or PFA
silicone rubber
HUBER+SUHNER
55/155/21
standard:
brass:
see pages 28 – 34
270 N / 60.7 lbs
27 N / 6.1 lbs
500
SMA
0.8 Nm ... 1.1 Nm / 7.1 in. lbs. ... 9.7 in. lbs
0.45 Nm / 4.0 in. lbs
PLATING
gold
passivated
SUCOPLATE , gold
gold
gold
gold
gold
117