112628 Amphenol Connex, 112628 Datasheet - Page 5

• Manufacturer Part Number: 112628
• Description: connector, rf coaxial, bnc straight crimp jack, for belden 8281, 9231, 9141, 75 ohm
• Manufacturer: Amphenol Connex
• Type: BNCr

Specifications of 112628

• Gender: F
• Body Style: Straight
• Terminate To: Flexible Cable
• Mounting Style: Cable
• Termination: Crimp
• Operating Frequency: 0 to 1
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Insulation Material: Teflon
• Body Material: Brass
• Product Length (mm): 33.6mm
• Impedance: 75Ohm
• Angle: Straight
• Application: Commercial
• Cable Type: RG-59/U
• Finish, Housing: Nickel
• Material, Dielectric: TFE
• Material, Housing: Brass
• Mating Type: Bayonet
• Primary Type: BNC
• Voltage, Rating: 500 V
• Lead Free Status / RoHS Status: Compliant

Copyright © 2001 - 2008 Amphenol Connex. All rights reserved.
Note: These characteristics are typical but may not apply to all connectors.
Reverse Polarity BNC Specifications
Note: These characteristics are typical but may not apply to all connectors.
Other Metal Parts Plating
Environmental
Temperature Range
Weatherproof
Mermetic Seals
Shock
Vibration
Moisture Resistance
Corrosion
Temperature Cycling
Altitude
Electrical
Impedance
Frequency Range
Voltage Rating
Dielectric Withstanding Voltage
VSWR
Insertion Loss
Insulation Resistance
Mechanical
Mating
Braid/Jacket Cable Affixment
Center Conductor Cable Affixment
Captivated Contact
Cable Retention
Material
Male Cetner Contact
Female Center Contact
Other Metal Parts
Insulators
Weatherproof Gaskets
Environmental
Temperature Range
Weatherproof
Corrosion
50
0-4 GHz
500 volts peak
1,500 volts rms
M39012 straight connectors: 1.3 max @ 0-4 GHz
M39012 right angle connectors: 1.35 max @ 0-4 GHz
0.18 dB @ 9 GHz
> 5,000 M
Bayonet coupling
Hex crimp
Hex crimp or solder
Except as noted
20-100 lbs depending on cable
Brass, gold plated
Beryllium copper or phosphorous bronze, gold plated
Brass with bright nickel finish
TFE
Silicone rubber
- 65°C to + 165 °C
When mated with other Amphenol RP-BNC connectors
MIL-STD-202, method 101, test condition B
Nickel
TFE insulators: - 65°C to + 165 °C
Copolymer of Styrene: - 55°C to + 85°C
Clamps with clamp gaskets; crimps with heat-shrink tubing
Pass helium leak test of 2x10
MIL-STD-202 method 202
MIL-STD-202 method 204, test condition D
MIL-STD-202 method 106
MIL-STD-202 method 101, test condition B
MIL-STD-202 method 102, test condition D
MIL-STD-202 method 105, test condition C
Copyright | Terms & Conditions | Contact Us | Amphenol.com
10-8
cc/second