131-8701-801 Emerson Network Power, 131-8701-801 Datasheet - Page 228

• Manufacturer Part Number: 131-8701-801
• Description: RF Connectors MINI 75 OHM SMB GOLD PRECISION LOAD
• Manufacturer: Emerson Network Power

Specifications of 131-8701-801

• Product: Connector
• Lead Free Status / RoHS Status: Compliant

228
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 3-Piece Plug, Jack
and Bulkhead Jack for
RG-178 Flexible Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
1. Identify piece parts. (4 piece parts plus nut and washer
2. Strip cable jacket and braid to dimensions shown. Do
3. Slide crimp insert over braid and against jacket. Fold
4. Assemble rear insulator over cable dielectric and
5. Slide body assembly over contact, rear insulator and
•
for bulkhead.)
not nick braid during strip operations.
braid around crimp insert as shown. Strip dielectric to
dimension shown. If cable is being manually stripped
the rear insulator can be assembled and used as a
guide. Do not nick center conductor during strip opera-
tion. Tin center conductor if contact is to be solder
attached. Do not tin center conductor if contact is to be
crimp attached.
contact over center conductor as shown.
Solder attachment: Solder contact to center conductor
using 60/40 tin/lead solder. Care should be taken that
excess solder is not applied.
Crimp attachment: Crimp contact to center conductor
using production tooling or hand tool 144-0000-910,
setting #2 with positioner 141-0000-907. Crimp location
should be centered between end of contact and x-hole.
Crimp attachment to solid center conductor cables is
not recommended.
crimp insert. Crimp body using recommended crimp
tool. Maintain forward pressure on cable while crimping.
Body crimp die hex: .105 (2.67) hex
www.EmersonNetworkPower.com/connectivity
CABLE GROUP
RG-178/U,
196
142-0402-011
142-0402-016
142-0302-011
142-0302-016
142-0302-431
142-0302-436
PART NO.
CRIMP HEX
.105 (2.67)
.105 (2.67)
.105 (2.67)
.105 (2.67)
.105 (2.67)
.105 (2.67)