102A0-52B2PL 3M Interconnect Solutions, 102A0-52B2PL Datasheet - Page 6

• Manufacturer Part Number: 102A0-52B2PL
• Manufacturer: 3M Interconnect Solutions
• Type: SCSIr

Specifications of 102A0-52B2PL

• Number Of Terminals: 100
• Termination Method: Solder
• Body Orientation: Right Angle
• Gender: RCP
• Number Of Ports: 1Port
• Pitch (mm): 2.54mm
• Number Of Contacts: 100POS
• Contact Plating: Gold Over Nickel
• Mounting Style: Through Hole
• Operating Temp Range: -55C to 85C
• Current Rating (max): 0.5A
• Voltage Rating Max: 200VDC/150VAC
• Lead Free Status / RoHS Status: Compliant

6-3 ELECTRICAL SPECIFICATIONS
WITHSTANDING
DISCONnNUITY
DESCRIPnON
INSULA TION
RESISTANCE
DIELECTRIC
RESIDENSE
VOLTAGE
CONTACT
TEST
No appearance of arcing
and break down.
Leak current: lmA Max.
SOOMQ Mill.
Less
Initial /
for each plating spec
Change of contact
resistance after
evaluation tests/
for each plating spec
REQUIREMENT
than
3Sm.O. Max.
::!: 25m.O. Max.
l~s
Impressed voltage is AC SOOV rms.
between adjacent two contacts for one
minute.
Impressed voltage is DC SOOV between
adjacent two contacts for one minute.
-Vibration
-Mechanical
Contact resistance is measured
Current: 1.5mA
Open Circuit Voltage: 20mV
by 4 terminal method.
* Measurement values include
(I)
.NOTE:
(2) PE Plating and PC Plating
3M SEQUENCE
3M SEQUENCE
H2S GAS SEQUENCE
DURABILITY
3M SEQUENCE
3M SEQUENCE
3M SEQUENCE
H2S GAS SEQUENCE
DURABILITY
MECHANICAL
3M SEQUENCE
9
mating (50 cycles) 7 moisture
PL Plating
mating (30 cycles) 7 moisture
thermal shock 7 humidity
thermal life
mating (30 cycles)7
300 cycles
thermal shock 7 humidity
thermal life
mating (50 cycles)7
500 cycles
at Short Circuit.
the resistance of contact pins
* as the part of3M
See Table I.
TEST CONDITION
test
as conductive material.
sock test
for environmental
/
/
7 salt spray
7 vibration
SHOCK /
-II /
-II /
-III /
-1/
-III /
-1/
7 salt spray
7 vibration
SEQUENCE-II
/
/
H2S gas
H2S gas
tests.
JNPS-O813
STANDARD
See Table
See Table
RELA TED
B