B41002A6154M EPCOS Inc, B41002A6154M Datasheet - Page 15

• Manufacturer Part Number: B41002A6154M
• Manufacturer: EPCOS Inc
• Type: Electrolyticr

Specifications of B41002A6154M

• Tolerance (+ Or -): 20%
• Voltage: 50VDC
• Mounting Style: Through Hole
• Construction: Radial
• Dcl: 3uA
• Lifetime: 1000
• Product Diameter (mm): 4mm
• Product Height (mm): 7mm
• Product Depth (mm): Not Requiredmm
• Product Length (mm): Not Requiredmm
• Lead Spacing (nom): 1.5mm
• Lead Diameter (nom): 0.45mm
• Operating Temp Range: -40C to 85C
• Capacitance: .15uF
• Ripple Current: 1.5mA
• Lead Free Status / RoHS Status: Compliant

11
12
13
Please read Cautions and warnings and
Important notes at the end of this document.
Cautions and warnings
Do not apply excessive force to the leads and terminals. Do not move the capacitor after sol-
dering it onto the PC board and do not carry the PC board by gripping the capacitor. Observe
the following rules to prevent undue stress to the capacitor:
a Do not tilt or bend the capacitor after soldering.
b Ensure that the terminal spacing matches the corresponding hole spacing on the PC
The aluminum case is not insulated from the cathode. Do not place a conductor under the
aluminum capacitors on the PC board as this may cause a short circuit. The case and top of
capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink
sleeve to ensure safe usage.
The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.
board.
15
08/08