BFC237343154 Vishay, BFC237343154 Datasheet - Page 25

• Manufacturer Part Number: BFC237343154
• Description: CAPACITOR POLYESTER 0.15UF, 250V, RADIAL
• Manufacturer: Vishay
• Series: MKT373r

Specifications of BFC237343154

• Capacitance: .15uF
• Tolerance (+ Or -): 10%
• Voltage: 250VDC/160VAC
• Temp Coeff (dielectric): PLYE
• Mounting Style: Through Hole
• Construction: Radial
• Failure Rate: Not Required
• Seated Plane Height: 11mm
• Product Diameter (mm): Not Requiredmm
• Product Height (mm): 11mm
• Product Depth (mm): 5mm
• Product Length (mm): 17.5mm
• Lead Spacing (nom): 15mm
• Lead Diameter (nom): 0.6mm
• Operating Temp Range: -55C to 105C
• Package / Case: Not Required
• Capacitor Dielectric Type: Polyester
• Capacitance Tolerance: ± 10%
• Voltage Rating: 250VDC
• Capacitor Case Style: Radial Leaded
• No. Of Pins: 2
• Lead Free Status / RoHS Status: Compliant

MKT371, MKT372, MKT373
Vishay BCcomponents
Voltage Signal
INSPECTION REQUIREMENTS
General Notes:
1. Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
Group C Inspection Requirements
www.vishay.com
118
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1
4.3.1
4.3
4.4
4.14
4.4.2
Dimensions (detail)
Initial measurements
Robustness of terminations
Resistance to soldering heat
Component solvent resistance
Final measurements
Voltage
U
P
For technical questions, contact:
T
1
CONDITIONS
Capacitance
Tangent of loss angle:
Tensile and bending
Method: 1A
Isopropylalcohol at room temperature
Method: 2
Visual examination
Capacitance
Tangent of loss angle
T
2
For C ≤ 470 nF at 100 kHz
for 470 nF < C ≤ 10 µF at 10 kHz
for C > 10 µF at 1 kHz
Solder bath: 280 °C ± 5 °C
Duration: 10 s
Immersion time: 5 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
MKT Radial Potted Type
DC Film Capacitors
U
P-P
[e-mail]
PERFORMANCE REQUIREMENTS
As specified in chapters “General Data” of
this specification
No visible damage
No visible damage
Legible marking
|ΔC/C| ≤ 2 % of the value measured initially
Increase of tan δ
Compared to values measured in 4.3.1
≤ 0.005 for: C ≤ 100 nF or
≤ 0.010 for: 100 nF < C ≤ 220 nF or
≤ 0.015 for: 220 nF < C ≤ 470 nF and
≤ 0.003 for: C > 470 nF
Time
Document Number: 28109
Revision: 22-Dec-10