OPIA400DTU Optek, OPIA400DTU Datasheet

Transistor Output Optocouplers 50mA 5000CRT%

OPIA400DTU

Manufacturer Part Number
OPIA400DTU
Description
Transistor Output Optocouplers 50mA 5000CRT%
Manufacturer
Optek
Datasheet

Specifications of OPIA400DTU

Maximum Fall Time
18 us
Maximum Input Diode Current
50 mA
Maximum Reverse Diode Voltage
6 V
Maximum Rise Time
18 us
Output Device
Phototransistor
Output Type
DC
Configuration
1 Channel
Input Type
DC
Maximum Collector Emitter Voltage
60 V
Maximum Collector Emitter Saturation Voltage
0.2 V
Isolation Voltage
5000 Vrms
Current Transfer Ratio
600 %
Maximum Forward Diode Voltage
1.4 V
Maximum Collector Current
50 mA
Maximum Power Dissipation
200 mW
Maximum Operating Temperature
+ 100 C
Minimum Operating Temperature
- 30 C
Package / Case
DIP-4
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Optocoupler—DIP Package
OPIA400, OPIA410 through OPIA413
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
Applications:
Features:
Approval Agency:
Description:
The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photo
Darlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation
voltage of 5,000 Volts RMS, these products meet typical power system isolation requirements.
Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation
between two power systems while maintaining the ability to transmit information from one power system to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 5,000 volts RMS. A variety of LED and photosensor
configurations are available depending on the system requirements.
The ratio Current Transfer Ratio (CTR) is identified between the output current and input current for analog
photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
All DIP product is shipped in a shipping tube with “TU” identified on the end of the part number.
RoHS
5,000 Vrms electrical isolation
Choice of a Single and Dual LED
Phototransistor or Photo Darlington Sensor
Low-cost plastic Dual-In-Line (DIP) package
UL Certification No: E58730
VDE Pending
High voltage isolation, up to 5,000 Volts RMS
PCBoard power system isolation
Industrial equipment power isolation
Medical equipment power isolation
Office equipment
Example: OPI400DTU is a 4-Pin DIP shipped in a tube (TU).
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
CTR
=
Photosenso
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
LED
Current
r
Current
=
10
20
mA
mA
*
100
=
200
Issue A.4
Page 1 of 17
11/08

Related parts for OPIA400DTU

OPIA400DTU Summary of contents

Page 1

... Medical equipment power isolation • Office equipment OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 − ...

Page 2

... OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 Pin # K Package Configuration 4-Pin DIP A K—C E 4-Pin DIP A—C E 4-Pin DIP A K—C E (Dar) 4-Pin DIP A K—C E (Dar) 4-Pin DIP A K— Emitter (Dar) = Photodarlington Example: OPIA400DTU FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com ...

Page 3

... Power Dissipation All except the part numbers noted below OPIA412 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 4

... Rise Time OPIA400 t r OPIA410 OPIA413 Fall Time OPIA400 t f OPIA410 OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 11/08 Page MIN TYP MAX - 1.2 1.4 1.0 1.2 1.3 ...

Page 5

... Floating Capacitance f R Isolation Resistance ISO OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 MIN TYP MAX ...

Page 6

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 11/08 Page OPIA400 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 7

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA400 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A ...

Page 8

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 11/08 Page OPIA410 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 9

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA410 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A ...

Page 10

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 11/08 Page OPIA411 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 11

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA411 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A ...

Page 12

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 11/08 Page OPI412 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 13

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPI412 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A ...

Page 14

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 11/08 Page OPIA413 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Page 15

... Optocoupler—DIP Package OPIA400, OPIA410 through OPIA413 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 OPIA413 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A ...

Page 16

... The LOT I.D. is the manufacturing location lot identification where Y is the year of manufacture, NNNN is a sequential lot identifier, and DDD is the day of the year of manufacture. – or use equivalent label format. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.4 11/08 ...

Page 17

... Tube Packaging Specifications (TU): DIMENSIONS ARE IN: INCHES TOLERANCE: ± 0.008 INCHES OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 ...

Related keywords