OPB930W51 Optek, OPB930W51 Datasheet - Page 2

• Manufacturer Part Number: OPB930W51
• Description: Photointerruptors Slotted Optical SW
• Manufacturer: Optek

Specifications of OPB930W51

• Maximum Fall Time: 70 ns
• Maximum Operating Temperature: + 70 C
• Maximum Rise Time: 70 ns
• Minimum Operating Temperature: - 40 C
• Wavelength: 880 nm
• Sensing Method: Transmissive
• Maximum Reverse Voltage (emitter): 2 V
• Slot Width: 3.18 mm
• Aperture Width: 1.27 mm
• Output Device: Photologic, Totem Pole, Buffer
• Power Dissipation: 300 mW
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Photologic® Slotted Optical Switch
OPB930 and OPB940 (L and W Series)
Absolute Maximum Ratings
Input Infrared LED
Output Photologic®
Total Device Power Dissipation
Issue A.3
Page 2 of 7
Notes:
Supply Voltage, V
Operating Temperature Range
Storage Temperature Range
Input Diode Power Dissipation
Output Photologic® Power Dissipation
Voltage at Output Lead (Open Collector Output)
Diode Forward DC Current
Diode Reverse DC Voltage
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 2.22 mW/°C above 25°.
(3) Derate linearly 4.44 mW/°C above 25°.
(4) Derate linearly 6.66 mW/°C above 25°.
(5) OPB930L/OPB940L series devices are terminated with 0.020” square leads designed for PCBoard mounting.
(6) Methanol and isopropanol are recommended as cleaning agents. Plastic housing is soluble in chlorinated hydrocarbons and
(7) All parameters tested using pulse technique.
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]
02/08
ketones.
OPB930, OPB940 Buffered Totem-Pole
OPB932, OPB942 Inverted Totem-Pole
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
CC
(not to exceed 3 seconds)
(4)
(2)
(T
Phone: [phone] or [phone]
A
=25°C unless otherwise noted)
(3)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
FAX: [phone] [e-mail] www.optekinc.com
OPB933 & OPB943 Inverted Open-Collector
OPB931, OPB941 Buffered Open-Collector
(1)
-40°C to +70° C
-40°C to +85° C
100 mW
200 mW
300 mW
260° C
40 mA
10 V
35 V
2 V