UDS200-02 Lantronix, UDS200-02 Datasheet
![Ethernet Modules & Development Tools EXTERNAL 10/100 DEV. SERVER 2 DB9 - RJ45](/photos/26/87/268724/img_uds200_sml.jpg)
UDS200-02
Manufacturer Part Number
UDS200-02
Description
Ethernet Modules & Development Tools EXTERNAL 10/100 DEV. SERVER 2 DB9 - RJ45
Manufacturer
Lantronix
Type
Device Serversr
Datasheet
1.UDS200-01.pdf
(2 pages)
Specifications of UDS200-02
Data Rate
300 bps to 115.2 Kbps
Memory Type
Flash
Interface Type
RS-232, Ethernet
Operating Voltage
9 V to 30 V
Maximum Power Dissipation
2 W
Operating Temperature Range
+ 5 C to + 50 C
Package / Case
95 mm x 72 mm x 23 mm
Product
Modules
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Remotely Monitor, Manage and Share Devices
Over a Network or the Internet
The dual-port UDS200 device server enables you to
connect serial devices to IP-based Ethernet networks,
quickly and easily. Powered by DSTni-LX, a powerful
Lantronix device networking chip, the UDS200 replaces
limited distance, point-to-point serial connections.
Our approach to network-enabling devices is
transparent to your attached devices and software.
You won’t need to change the way you work, and
there’s no need to develop special software to take
advantage of Ethernet networking. And with the
UDS200 any piece of equipment with a serial port
can be added to the network in a matter of minutes!
Using a method called serial tunneling, the UDS200
encapsulates serial data into packets and transports
it over Ethernet. Using two UDS200s, connected by
a network, virtual serial connections can be extended
across a facility or around the world. So you can
manage your equipment from virtually anywhere over
a network or the Internet.
The included redirection software extends the
functionality of your COM port-based Windows
applications. With virtual COM ports, mapped to
remote device servers on the network, you can
replace direct serial connections.
®
Easy to Set Up and Use
The included Windows-based configuration software
simplifies installation and setup. The UDS200 can also
be set up locally through its serial port, or remotely
over a network using Telnet or a web browser.
The UDS200 includes a built-in web server, which
can be used for configuration and to host user-
created web pages for accessing and controlling the
connected equipment.
Flash memory provides maintenance-free non-volatile
storage of web pages, and allows future system
software upgrades.
Modem Replacement
In modem emulation mode, the UDS200 is used to
replace dial-up modems. The unit accepts modem
AT commands on the serial port, then establishes a
network connection to the end device, leveraging
network connections and bandwidth to eliminate
dedicated modems and phone lines.
If you’re looking for a transparent, cost-effective, and
scalable means to network-enable your serial devices,
look no further than the UDS200.
UDS200 Device Server
Remotely monitor, manage and control serial devices
Replace limited-distance point-to-point serial connections
Two RS-232 serial ports pinned the same as a standard PC
Configurable with included Windows
Compact size enables it to fit almost anywhere
over Ethernet
built-in web server
®
software or via
Related parts for UDS200-02
UDS200-02 Summary of contents
Page 1
... You won’t need to change the way you work, and there’s no need to develop special software to take advantage of Ethernet networking. And with the UDS200 any piece of equipment with a serial port can be added to the network in a matter of minutes! Using a method called serial tunneling, the UDS200 encapsulates serial data into packets and transports it over Ethernet ...
Page 2
... Com Port Redirector software, and related utilities Ordering information UDS200-01 (115 VAC, 50/60 Hz adapter) UDS200-02 (100-240 VAC, 50/60 Hz Intl. adapter) Device Server: 2 DB9 RS232 DTE serial ports, 10Base-T/100Base-TX Ethernet, diagnostic LEDs, AC power adapter, CD-ROM with configuration tools and documentation, printed Quick Start Guide ...