33000 Parallax Inc, 33000 Datasheet - Page 5

• Manufacturer Part Number: 33000
• Description: Power Management Modules & Development Tools 30W Solar Cell Kit
• Manufacturer: Parallax Inc

Specifications of 33000

• New! Us2012 Catalog Page: Solar Cells_Panels
• Voltage - Output: *
• Operating Temperature: *
• Current Short Circuit (isc): *
• Package / Case: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Your panel should now look like
that shown in Figure 9.
Copyright © Parallax Inc.
Remove the pink protective cover from
one of the single-conductor strips, and
thread it through the hole (in groove “F”),
then lay it into the groove, adhesive side
down. It should overlap the two-
conductor bus-bar, as shown in Figure 7
such that there is an exposed copper area
where a solder bridge can be made at the
overlapping junction.
Remove the full length of the white
protective cover (including the portion
that goes through the hole to the
backside of the panel). Stick the bus-bar
to the backside of the panel as well.
Remove the pink cover from the second
7.75” single bus-bar.
Place the single bus-bar in groove “D” as
shown in Figure 8.
Thread the excess through the hole to
the backside, and remove the white
protective cover, just like we did above.
Place the third 7.75” single
bus-bar into groove “E” and
the fourth into groove “B,”
and then remove the white
protective covers from both.
Cut a single bus-bar 3.5”
long, and place it into
groove “C,” and remove the
white protective cover.
30 Watt Solar Panel Kit (#33000)
Figure 9
Figure 8
Figure 7
v1.0 2/19/2010 Page 5 of 20