EN5365QI-E Enpirion, EN5365QI-E Datasheet - Page 3

• Manufacturer Part Number: EN5365QI-E
• Description: Power Management Modules & Development Tools 6AMP MOD INT IND VID EVAL BOARD
• Manufacturer: Enpirion
• Type: DC/DC Switching Converters, Regulators & Controllersr

Specifications of EN5365QI-E

• Input Voltage: 2.4 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Product: Power Management Modules
• For Use With/related Products: EN5365QI

EN5365QI Evaluation Board Application Note
October 2006 V_1
Figure 1. Evaluation Board Layout.
Output Voltage Select
The EN5365QI utilizes a 3 pin
output voltage selector. The output
voltage is programmed by setting
the VSx jumpers to either a logic
“1” or a logic “0” as described in t
he
Quick Start section. The volta
ge
select pins are pulled up internally
and so will default to a logic “1” if
left open.
Table 1 shows the truth table for
V
selection. There are seven
Table 1. Output Voltage Select Truth Table
OUT
preset output voltage levels which
can be chosen via the VSx jumpers.
WARNING: Voltage select pins must not be adjusted while part is enabled.
Doing so will result in damage to the part. Always disable part when changing
output voltage setting.
Page 3 of 5