STR750-MCKIT STMicroelectronics, STR750-MCKIT Datasheet - Page 14

• Manufacturer Part Number: STR750-MCKIT
• Description: Power Management Modules & Development Tools Compete motr control starter kit
• Manufacturer: STMicroelectronics
• Type: Motor / Motion Controllers & Driversr

Specifications of STR750-MCKIT

• Input Voltage: 18 V to 35 V
• Product: Power Management Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Description of jumper and connector settings
14/21
Table 4.
W11
W12
W13
W14
W15
W16
W17
W18
W19
Jumper
Jumper descriptions (continued)
Present
Not present
Present
Not present
Present
Not present
Present
Not present
Present
Not present
Set to default position of
silk-screen printing
Set to reverse position of
silk-screen printing
Present
Not present
Present
Not present
Present
Not present
Selection
Connects the output of diagnostic comparator to the
Fault/MC EMGCY input of microcontroller pin P1.10
Disconnects the output of diagnostic comparator from
the Fault/MC EMGCY input of microcontroller pin P1.10
Connects the tachometer signal to Measure Phase A /
TIM2_TI1 input P0.03. In that case, W17 is not present
(removed).
Disconnects the tachometer signal from Measure Phase
A / TIM2_TI1 input P0.03.
The 3.3V Pow supply connected to Vdd_m is used to
supply the microcontroller board connected on pin 26 of
the motor control connector J7.
Vdd_m is not connected to the 3.3V Pow of power board.
The 5V supply connected to Vdd_m, is used to supply
the microcontroller board connected on pin 26 of the
motor control connector J7.
Vdd_m is not connected to the 5V of the power board.
Uses the 5V of the microcontroller board to supply the
power board via the motor control connector J7.
The 5V of the power board is not supplied by the
microcontroller board.
The +Vdd_m is used to supply the Hall sensor or
encoder
The +5V is used to supply the Hall sensor or encoder
Enables Hall1/A+ on Measure Phase A/ TIM2_TI1 input
P0.03
Disables Hall1/A+ for Measure Phase A/ TIM2_TI1 input
P0.03
Enables Hall2/B+ on Measure Phase B/ TIM2_TI2 input
P1.03
Disables Hall2/B+ for Measure Phase B/ TIM2_TI2 input
P1.03
Enables Hall3/Z+ on Measure Phase C/ TIM0_TI1 input
P0.01
Disables Hall3/Z+ for Measure Phase C/ TIM0_TI1 input
P0.01
Description
UM0379