MSP430-H2618 Olimex Ltd., MSP430-H2618 Datasheet - Page 2

Microcontroller Modules & Accessories HDR BRD FOR MSP430F2618

MSP430-H2618

Manufacturer Part Number
MSP430-H2618
Description
Microcontroller Modules & Accessories HDR BRD FOR MSP430F2618
Manufacturer
Olimex Ltd.
Datasheet

Specifications of MSP430-H2618

Product
Microcontroller Modules
Core Processor
MSP430-H2618
Interface Type
I2C, JTAG, SPI, UART
Operating Supply Voltage
3.3 V
Board Size
1.85 in x 1.85 in
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
INTRODUCTION:
BOARD FEATURES:
ELECTROSTATIC WARNING:
BOARD USE REQUIREMENTS:
MSP430-H2618 header board provides easy way for developing and
prototyping with the new mixed signal MSP430F2618 microcontroller. It has JTAG
interface and most of the GPIOs are on extension headers where you can connect
your additional circuits.
The MSP430-H2618 board is shipped in protective anti-static packaging. The board
must not be subject to high electrostatic potentials. General practice for working
with static sensitive devices should be applied when working with this board.
Cables:
Hardware:
Software:
MCU: MSP430F2618 with 116 KB + 256 B Flash Memory, 8 KB RAM
JTAG connector
32 768 Hz oscillator crystal
Optional high frequency crystal (socket)
Extension headers for all microcontroller pins
PCB: FR-4, 1.5 mm (0.062''), green soldermask, silkscreen component print
Dimensions 46.99 x 46.99 mm (1.850 x 1.850")
The cable you will need depends on the programmer/debugger you
use. If you use MSP430-JTAG, you will need LPT cable. You will need
1.8 meter USB A-B cable to connect MSP430-JTAG-ISO or MSP430-
JTAG-TINY to a USB host on your PC. If you use MSP430-JTAG-RF,
you will not need a cable.
Programmer/Debugger – one of the Olimex MSP430-JTAG tools:
MSP430-JTAG, MSP430-JTAG-ISO, MSP430-JTAG-TINY, MSP430-
JTAG-RF.
Olimex MSP430 programmer – free stand-alone software which
allows you to program MSP430 devices without any third party
software; MSP430 Kick Start C compiler and debugger (free for
assembly, limited for C); MSPGCC – free compiler and debugger.
You will also need drivers for the JTAG programmer that you use (to
be found on the corresponding web pages on our web site).
Page 2

Related parts for MSP430-H2618