PIC32-MAXI-WEB Olimex Ltd., PIC32-MAXI-WEB Datasheet - Page 2

• Manufacturer Part Number: PIC32-MAXI-WEB
• Description: MCU, MPU & DSP Development Tools TCP-IP DEV BRD PIC32MX460F512L
• Manufacturer: Olimex Ltd.

Specifications of PIC32-MAXI-WEB

• Processor To Be Evaluated: PIC32MX795F512L
• Processor Series: PIC32
• Data Bus Width: 32 bit
• Interface Type: USB, CAN, RS232
• Operating Supply Voltage: 2.3 V to 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

INTRODUCTION:
BOARD FEATURES:
ELECTROSTATIC WARNING:
This board features a PIC32 processor with embedded 100Mbit Ethernet module
allows you to easily develop Ethernet connectivity applications. It has everything
you normally would need for such applications: power relays which you can
command through web interface, a large 240x320 TFT LCD with touchscreen
support that allows you to develop complex graphical user interface applications,
digital optoisolated inputs, trimmer potentiometer, accelerometer with integrated
temperature sensor, two CAN interface channels, RS232 interface, USB on-the-go
and micro SD card slot to store large amounts of data. With this board you can
easily automate your home and then control and monitor it from any point in the
world via Internet. An extension connector is available so you can connect custom
made hardware to the board. The PIC32MX795F512L has 512K Flash memory (plus
an additional 12 KB of Boot Flash).
The PIC32-MAXI-WEB board is shipped in protective anti-static packaging. The
board must not be subject to high electrostatic potentials. General practice for
working with static sensitive devices should be applied when working with this
board.
Microcontroller
PIC32MX795F512L High-Performance, USB, CAN and Ethernet 32-bit Flash
TFT LCD 320x240 65 k colours with resistive touchscreen
Debug interface – JTAG and ICSP
RESET circuit
Reset button
Two optoisolated digital inputs with indicator LEDs
Two CAN interfaces
100Mbit Ethernet interface
Two UEXT connectors to connect to other Olimex boards
Accelerometer with integrated temperature sensor
micro SD card holder
Two Relays 10A/250VAC with indicator LEDs
USB_OTG
RS232 interface
Trimmer connected to analogue input
Three user LEDs
PWR LED
Three user buttons
3.3V voltage regulator
Dimensions 140x100 mm (5.51x3.94")
Page 2