3310C-112-102 Bourns Inc., 3310C-112-102 Datasheet - Page 2

• Manufacturer Part Number: 3310C-112-102
• Description: Panel Mount Potentiometers 9mm 1Kohms Flatted Single Cup
• Manufacturer: Bourns Inc.
• Type: Potentiometerr

Specifications of 3310C-112-102

• Resistance: 1kohm
• Power Rating: 1/4W
• Tolerance (+ Or -): 20%
• Number Of Turns: 1Turn
• Mounting Style: Through Hole
• Termination Style: Pin
• Operating Temp Range: -40C to 125C
• Failure Rate: Not Required
• Shaft Diameter (mm): 3.18mm
• Product Diameter (mm): Not Requiredmm
• Product Length (mm): 17.88mm
• Product Height (mm): 9.53mm
• Product Depth (mm): 9.53mm
• Temperature Coefficient: ±1000
• Tolerance: 20 %
• Taper: Linear
• Element Type: Conductive Plastic
• Shaft Type: Flatted / D
• Shaft Length: 19.05 mm
• Shaft Diameter: 3.18 mm
• Operating Temperature Range: - 40 C to + 125 C
• Product: Panel Mount Potentiometers
• Lead Free Status / RoHS Status: Not Compliant

Additional Features
■
■
Popular values listed in boldface. Consult
factory for special resistances.
Standard Resistance Table
Audio taper versions available as special order
RoHS compliant versions available*
Resistance
3310 - 9 mm Square Sealed Panel Control
1,000,000
(Ohms)
100,000
200,000
500,000
10,000
20,000
50,000
1,000
2,000
5,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
Model Number Designator
Terminal Style Designator
Shaft End Designator
Shaft Length Designator
Bushing Designator
Resistance Code
RoHS Identifi er
How To Order
3310 = 9 mm Panel Control
Single Cup:
C = In-line Straight Terminals Side Exit 2.54 mm centers
R = In-line Terminals Rear Exit 2.54 mm centers
P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit
Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit
Dual Cup (Pot/Pot or Pot/Switch):
H = Dual In-line Straight Terminals Rear Exit 2.54 mm centers
0 = Shaft End Slotted
1 = Shaft End Flatted
0 = 12.7 mm FMS Long Plastic Shaft (Available w/bushing only)
1 = 19.05 mm FMS Long Plastic Shaft (Available w/bushing only)
2 = 5.59 mm FMS Long Plastic Shaft (Bushingless version only)
Pot (or Pot/Pot):
1 = 6.35 mm x 6.35 mm Plastic
2 = 6.35 mm x 6.35 mm Ni Plated Brass
5 = Bushingless (Board Level Control)
Pot/Switch Bushing Designator (use with “H” terminal style only.)
3 = 6.35 mm x 6.35 mm Plastic
4 = 6.35 mm x 6.35 mm Ni Plated Brass
6 = Bushingless (Board Level)
(1st 2 digits are signifi cant, 3rd digit is number of 0s to follow)
L = Compliant
Blank = Non-Compliant
Customers should verify actual device performance in their specifi c applications.
Specifi cations are subject to change without notice.
3310 Y - 0 0 1 - 103 L