1721081-5 TE Connectivity, 1721081-5 Datasheet - Page 4

• Manufacturer Part Number: 1721081-5
• Description: RELAY GP SPST-NO 3A 12VDC PCB
• Manufacturer: TE Connectivity
• Series: PCJ, OEGr

Specifications of 1721081-5

• Contact Form: SPST-NO (1 Form A)
• Contact Rating (current): 3A
• Switching Voltage: 250VAC, 30VDC - Max
• Turn On Voltage (max): 9 VDC
• Turn Off Voltage (min): 0.6 VDC
• Relay Type: General Purpose
• Coil Type: Non Latching
• Coil Current: 16.7mA
• Coil Voltage: 12VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PCJ-112D3M,301

Rev. A1
5.13 端子強度
5.14 耐熱性
5.15 耐寒性
5.16 耐湿性
5.17 熱衝撃性
5.18 半田耐熱性
5.19 半田付け性
(2)
TERMINAL STRENGTH
SOLDERABILITY
COLD PROOF
THERMAL SHOCK
SOLDERING THERMAL
THERMAL PROOF
HUMIDITY PROOF
耐久
ENDURANCE
各端子に押し込み 5N を 10 秒間加えて、外観・特性に異常な
きこと。
85℃中に 240 時間放置し、その後 2 時間常温・常湿中に放置し、
－40℃中に 240 時間放置し、その後 2 時間常温・常湿中に放置し、
温度 40℃ 湿度 90％RH 中に 240 時間放置し、その後 2 時間常
温・常湿中に放置し、絶縁抵抗 10MΩ以上構造・特性に異常
なきこと。
高温(85℃) １時間、低温 (-40℃) 0.5 時間を 1 サイクルとして
350±5℃の溶融半田に 3 秒間又は、265℃の溶液半田に
２６０℃ 5 秒間にて正常に付くこと｡
加速度９８０m／s² 作用時間 6ms の衝撃を 3 方向に各 3 回
加えた後、構造・特性に異常なきこと。
No construction trouble when shocks is from 3 directions 3 times.
(at Peak acceleration 980 m/s²
No construction and exterior trouble when push into any terminals by 5N
for 10sec.
構造・特性に異常なきこと。
Not any trouble on construction and characteristic when leave in 85℃ 240h
After that, leave it in standard condition for 2 hours.
構造・特性に異常なきこと。
Not any trouble on construction and characteristic when leave in -40℃ 240h
After that, leave it in standard condition for 2 hours.
characteristic when leave in 40℃ 90% 240h. After that, leave it in
standard condition for 2 hours.
100 サイクル繰り返した後､常温に 2 時間放置した後､構造･特性
に異常なきこと。
Not any troubles on construction and characteristic when leave it in -40℃ and
85℃ temp. room for 1 h each. That is one cycle. After 100 cycles has done, leave it
on standard condition for 2 hours.
10 秒間端子を浸漬し構造・特性に異常なきこと。
Not any troubles on construction and characteristic. When dipped into soldering
bath 350±5℃ 3sec. or 265℃ 10sec.
Not any problems solder dipped at 260℃ 5 sec.
Insulation resistance 10MΩ Min. Not any troubles on construction and
Product Specification
Duration 6ms.)
108-79816
4 of 6