LCMXO2280C-M-EVN Lattice, LCMXO2280C-M-EVN Datasheet - Page 5

• Manufacturer Part Number: LCMXO2280C-M-EVN
• Description: Microcontroller Modules & Accessories MachXO Mini Dev Kit
• Manufacturer: Lattice
• Series: MachXOr
• Type: PLDr

Specifications of LCMXO2280C-M-EVN

• Silicon Manufacturer: Lattice
• Silicon Core Number: LCMXO2280C-4TN144C
• Silicon Family Name: MachXO
• Rohs Compliant: Yes
• Contents: Board, Cables, Documentation
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: LCMXO2280C-3FTN256C

Lattice Semiconductor
To download the Mini SoC Demo source files and reprogram the Mini board:
1. See the Download Demo Designs and Programming Demo Designs with ispVM sections of this document.
2. Use .\Demo_MachXO_Mini_SoC\project\mini_soc_demo.jed to restore the Mini SoC demo design.
Connect to the MachXO Mini Evaluation Board
Use the USB cables provided to connect the evaluation board to your PC:
1. Connect one USB cable from a USB port on your PC to the board’s RS-232/USB Debug socket (DEBUG-J8)
2. If you are prompted, “Windows may connect to Windows Update” select No, not this time from the available
3. Select Search for the best driver in these locations and click the Browse button to browse to the Windows
4. Click Next . A screen will display as Windows copies the required driver files. Windows will display a message
5. Click Finish to install the USB driver. A second “Found New Hardware” screen will appear.
6. Repeat instructions 2-4 to install the USB-to-Serial Port driver.
Setup Windows HyperTerminal
Windows HyperTerminal is a terminal program found on most PCs that can be used to communicate with the Mini
board.
To set up Windows HyperTerminal:
1. From the Start menu, select Control Panel > System . The System Properties dialog appears.
2. Select the Hardware tab and click Device Manager . The Device Manager dialog appears.
on the top-left side of the board as shown in Figure 2. After connection is made, a blue Power LED (PWR) will
light up indicating the board is powered on.
options and click Next to proceed with the installation. Choose the Install from specific location (Advanced)
option and click Next .
driver folder that has been created (see the Download Windows Hardware Drivers section of this document).
Select the CDM 2.04.06 WHQL Certified folder and click OK .
indicating that the installation was successful.
5
MachXO Mini Development Kit
User’s Guide