EVB-EMC1033 SMSC, EVB-EMC1033 Datasheet - Page 3

• Manufacturer Part Number: EVB-EMC1033
• Description: MCU, MPU & DSP Development Tools Evaluation Board
• Manufacturer: SMSC

Specifications of EVB-EMC1033

• Processor To Be Evaluated: EMC1033
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EMC1002/EMC1033/EMC1402 EVB User Manual
SMSC EMC1002/EMC1033/EMC1402
2 Getting Started
2.1
2.1.1
2.1.2
2.1.3
System Requirements
To use the EVB you will need:
n
n
n
Feature Summary
n
n
n
n
n
n
Board Layout
Installing the EVB
1. Install the RegMan application and device driver on a PC by running Setup.exe from the RegMan
2. Connect the supplied USB cable to an available USB port on the PC. Plug the “mini-B” end of the
3. Start the EVB Software by selecting the Register Manager application from the SMSC folder from
A PC running Windows 2000 or XP
Display resolution 800x600 (or larger to view several windows simultaneously)
An available USB port
Windows Register Manager application allows viewing and changing register values as well as
graphing temperature history
USB communication to evaluation board
Resistive Error Correction can be demonstrated
LEDs for
Low cost fan control driven by
An external SMBus master may also be used (circuit modifications required)
distribution CD. A revision history and install/uninstall notes may be found in the readme.txt file on
the disk.
USB cable into EVB connector P6. The +3.3V, Bridge ACT,
should illuminate. After the EVB is connected to the PC the “Find New Hardware” wizard will pop
up for USB driver installation. Follow the instructions in the readme.txt file to complete the
installation process.
the Programs Windows Start menu. The EVB will initialize and the Register Manager Help screen
will appear as in
running.
USB
P6
Alert/Therm2
Figure 2.1 EMC1002 Board Outline and Silkscreen
Figure
and
2.2. The USBAct LED should be blinking when the Register Manager is
Addr/Therm
Alert/Therm2
indication as well as USB bridge activity
3
and
Addr
/
Therm
EMC1002
outputs
Alert/Therm2
EMC
1002
and
Revision 1.1 (08-21-07)
Addr
P2
/
Therm
LEDs