EVB-EMC1428 SMSC, EVB-EMC1428 Datasheet - Page 3

• Manufacturer Part Number: EVB-EMC1428
• Description: MCU, MPU & DSP Development Tools Eval Brd EMC1428
• Manufacturer: SMSC

Specifications of EVB-EMC1428

• Processor To Be Evaluated: EMC1428
• Interface Type: USB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EMC1428 EVB User Manual
SMSC EMC1428
2 Getting Started
2.1
2.2
2.3
System Requirements
Feature Summary
Installing the EVB
To use the EVB you will need:
n
n
n
n
n
n
n
n
n
n
1. Install the Chip Manager application and device driver on a PC by running Setup.exe from the Chip
2. Connect the supplied USB cable to an available USB port on the PC. Plug the “mini-B” end of the
3. Start the EVB Software by selecting the Chip Manager application from the SMSC folder from the
Note: The SMSC Chip Manager application allows viewing and changing register values for a variety
A PC running Windows 2000 or XP
Display resolution 800x600 (or larger to view several windows simultaneously)
An available USB port
The SMSC Chip Manager (ChipMan) application allows viewing and changing register values
Graphing of any register
Headers for connecting an external diode or CPU/GPU
Resistance Error Correction verification
Saving of settings of all registers allowing for quick loading at a later time
USB communication to evaluation board
An external SMBus master be easily connected
Manager distribution CD. A revision history and install/un-install notes may be found in the
readme.txt file on the disk.
USB cable into EVB connector P3. The +3.3V and Bridge ACT LEDs should illuminate. After the
EVB is connected to the PC the “Find New Hardware” wizard will pop up for USB driver installation.
Follow the instructions in the readme.txt file to complete the installation process.
Programs Windows Start menu. The EVB will initialize and the Chip Manager Quick Help screen
will appear as in
running. For more help with Chip Manager, select Help -> Contents for an html based help
document as shown in
of EVBs including the EMC1001, EMC1002, EMC1023, EMC1033 and the entire family of
EMC14XX. The Chip Manager software only needs to be installed once to support all of these
EVBs. The list of supported EVBs may be found in the pulldown menu under Options -> Select
Device.
Figure
Figure
2.1. The USBAct LED should be blinking when the Chip Manager is
2.2.
3
Revision 1.0 (08-21-07)