V600-D23P66N Omron, V600-D23P66N Datasheet - Page 15

• Manufacturer Part Number: V600-D23P66N
• Description: RFID Modules & Development Tools 256 BYTE RFID TAG
• Manufacturer: Omron

Specifications of V600-D23P66N

• Frequency Range: 530kHz
• Memory Size: 256Byte
• Width: 34mm
• Tag Memory: EEPROM
• Read/write Cycles: 100000
• Diameter: 8mm
• Height: 3.5mm
• Tag Technology: Passive
• Depth: 34mm
• For Use With: V600 RFID
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Note: 1. The transmission distance/transmission time priority mode setting can be made using the lower-level transmission mode setting switch
16
V600-D23P55
Data Carrier
Recommended combinations
2. With Parallel-interface Controllers, the mode setting is always transmission distance priority.
3. The specifications take fluctuations in ambient temperature and slight differences between products into account.
4. This is the transmission distance when using the V600-HS@1 and V600-HA51 combination.
or memory switch only with a Serial-interface Controller or ID Sensor Unit.
Electromagnetic Coupling RFID System
V600-HS51
(See note 4.)
V600-HS61
(See note 4.)
V600-H52
R/W Head
Stationary Read
Stationary Read
Stationary Read
Installation
distance
Write
distance
distance
Write
distance
distance
Write
distance
V600
Transmission
distance priority
Transmission
time priority
Transmission
distance priority
Transmission
time priority
Transmission
distance priority
Transmission
time priority
Transmission
distance priority
Transmission
time priority
Transmission
distance priority
Transmission
time priority
Transmission
distance priority
Transmission
time priority
Controller
mode
0.5 to 6.5 mm (max.
axial offset ±2 mm)
0.5 to 6.0 mm (max.
axial offset ±2 mm)
0.5 to 6.5 mm (max.
axial offset ±2 mm)
0.5 to 6.0 mm (max.
axial offset ±2 mm)
0.5 to 7.0 mm (max.
axial offset ±2 mm)
0.5 to 6.0 mm (max.
axial offset ±2 mm)
0.5 to 7.0 mm (max.
axial offset ±2 mm)
0.5 to 6.0 mm (max.
axial offset ±2 mm)
0.5 to 9.0 mm (max.
axial offset ±2 mm)
0.5 to 8.5 mm (max.
axial offset ±2 mm)
0.5 to 8.5 mm (max.
axial offset ±2 mm)
0.5 to 8.5 mm (max.
axial offset ±2 mm)
Transmission
distance
These Data Carriers are for flush
mounting in non-metallic bases
only.
The transmission distance decreas-
es considerably when flush mount-
ed in non-metallic bases. Refer to
the V600 R/W Heads and EEPROM
Data Carriers Operation Manual
(Cat. No. Z128) for details.
Condition for DC and R/W head
V600-HS61
R/W Head
Iron
(Resin, plastic, wood, etc.)
V600-H52
R/W Head
V600-HS51
R/W Head
Iron
Iron
(Resin, plastic, wood, etc.)
(Resin, plastic, wood, etc.)
installation
Non-metallic
Data Carrier
Non-metallic
Non-metallic
Data Carrier
Data Carrier