SX-550-1701 Silex Technology, SX-550-1701 Datasheet - Page 103

• Manufacturer Part Number: SX-550-1701
• Description: WiFi / 802.11 Modules & Development Tools 802.11a/b/g Bridge Serial Server
• Manufacturer: Silex Technology

Specifications of SX-550-1701

• Interface Type: UART
• Board Size: 59.6 mm x 49.1 mm x 14.3 mm
• Security: 802.1xEAP, PEAP, WEP, WPAPSK, TKIP, WPA2, AES
• Operating Voltage: 3.3 VDC
• Operating Temperature Range: 0 C to + 50 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SET IP ACcess
SET IP RANge
SH IP ACcess
SET IP ADdress
SET IP ARP ENable
SET IP BAnner
SET IP CHKSUM
SET IP BOot
SET IP ENable
TCP/IP Commands
Part Number 40183-101
Command
Allows or prevents access to a block of remote addresses
The default value is empty list.
Format:
Allows or prevents access to a range of remote addresses
The default value is empty list.
Format:
Displays current access list settings
Sample output:
Sets server IP address
The default value is 192.0.0.192
Format:
Enables or disables setting of IP address with an ARP packet
The default value is Enable.
Format:
Enables or disables printing of job banner on LPD jobs
The default value is Disable.
Format:
Enables or disables verification of IP checksum on received packets
The default value is Enable.
Format:
Sets number of tries for each enabled IP boot method, if not set to static
The default value is 3.
Format:
Enables or disables all IP based protocols
The value is Enable.
Format:
SET IP ACcess [EN | DI | ALL] aa.bb.cc.dd {MAsk
ee.ff.gg.hh]
SET IP RANge [EN | DI | ALL] aa.bb.cc.dd {MAx
ee.ff.gg.hh]
All hosts permitted access
SET IP ADdress aa.bb.cc.dd
SET IP ARP [ENable | DIsable]
SET IP BAnner [ENable | DIsable]
SET IP CHKSUM [ENable | DIsable]
SET IP BOot
Table 40 TCP/IP Commands
Silex SX-550 Developer's Guide
n
Description
Page 95