MMA02040C9099FB300 Vishay, MMA02040C9099FB300 Datasheet - Page 4

• Manufacturer Part Number: MMA02040C9099FB300
• Description: MMA 0204-50 1% BL 90R9
• Manufacturer: Vishay
• Series: MMAr

Specifications of MMA02040C9099FB300

• Resistance (ohms): 90.9
• Power (watts): 0.4W
• Composition: Thin Film
• Temperature Coefficient: ±50ppm/°C
• Tolerance: ±1%
• Size / Dimension: 0.055" Dia x 0.142" L (1.40mm x 3.60mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: MELF, 0204
• Resistance In Ohms: 90.9
• Case: 0204
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Height: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4455467

Notes
• Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability.
• Resistance values to be selected for ± 5 % and ± 2 % tolerance from E24, for ± 1 % tolerance from E24 and E96 and for ± 0.5 % tolerance
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
ceramic body (Al
temperature coefficient. Nickel plated steel termination caps
are firmly pressed on the metallised rods. A special laser is
used to achieve the target value by smoothly cutting a helical
groove in the resistive layer without damaging the ceramics.
The resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
Four or five color code rings designate the resistance value
and tolerance in accordance with IEC 60062
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. This includes pulse load screening (for R
 10 ) and additional non-linearity screening (for R  30 )
for the elimination of products with a potential risk of early life
failures according to EN 140401-803, 2.1.2.2. Only accepted
products are laid directly into the blister tape in accordance
with IEC 60286-3, Type II
IEC 60286-6
ASSEMBLY
The resistors are suitable for processing on automatic SMD
assembly systems. They are suitable for automatic soldering
using wave, reflow or vapour phase as shown in
IEC 61760-1
production or requalification, however, excellent solderability
is proven after extended storage in excess of 10 years. The
permitted storage time is 20 years.
The resistors are completely lead (Pb)-free, the pure tin
plating provides compatibility with lead (Pb)-free soldering
processes. The immunity of the plating against tin whisker
growth has been proven under extensive testing.
The encapsulation is resistant to all cleaning solvents
commonly used in the electronics industry, including
alcohols, esters and aqueous solutions. The suitability of
conformal coatings, if applied, shall be qualified by
appropriate means to ensure the long-term stability of the
whole system.
Notes
(1)
(2)
(3)
Document Number: 28713
Revision: 05-Mar-12
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TCR
± 100 ppm/K
± 50 ppm/K
± 25 ppm/K
Jumper
from E24 and E192.
Global Automotive Declarable Substance List, see www.gadsl.org.
CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade
organisation representing the information and communications technology and consumer electronics), see
 issues  environment policy  chemicals  chemicals for electronics.
The quoted IEC standards are also released as EN standards with the same number and identical contents.
(3)
(3)
.
. Solderability is specified for 2 years after
2
O
DESCRIPTION
3
) and conditioned to achieve the desired
(3)
or bulk case in accordance with
TOLERANCE
± 0.5 %
± 0.5 %
± 5 %
± 5 %
± 2 %
± 1 %
± 1 %
MMU 0102, MMA 0204, MMB 0207 - Professional
For technical questions, contact:
This document is subject to change without notice.
Professional MELF Resistors
(3)
.
10 m; I
10  to 2.21 M
0.22  to 0.91 
10  to 221 k
10  to 221 k
10  to 221 k
1  to 9.1 
MMU 0102
-
max.
All products comply with the GADSL
CEFIC-EECA-EICTA
hazardous substances. This includes full compliance with
the following directives:
 2000/53/EC End of Vehicle Life Directive (ELV) and
 2011/65/EU Restriction of the use of Hazardous
 2002/96/EC Waste Electrical and Electronic Equipment
APPROVALS
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components to the detail
specification EN 140401-803 which refers to EN 60115-1,
EN 140400 and the variety of environmental test procedures
of the IEC 60068
Conformity is attested by the use of the CECC logo (
the mark of conformity on the package label.
Vishay
Manufacturer” in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC
Vishay Beyschlag manufacturing process.
The resistors are qualified according to AEC-Q200.
RELATED PRODUCTS
For products with precision specification see the datasheet:
• “Precision MELF Resistors”
• “High Precision MINI-MELF Resistor”
Resistors are available with established reliability in
accordance with EN 140401-803 Version E. Please refer to
datasheet “MELF Resistors with Established Reliability”
(www.vishay.com/doc?28707).
= 2 A
(www.vishay.com/doc?28714)
(www.vishay.com/doc?28715)
Annex II (ELV II)
Substances Directive (RoHS)
Directive (WEEE)
[e-mail]
QC 001002-3,
Beyschlag
10 m, I
0.22  to 0.91 
10  to 2.21 M
10  to 511 k
10  to 511 k
RESISTANCE
1  to 10 M
MMA 0204
(3)
series.
-
-
max.
clause
(2)
has
= 3 A
list of legal restrictions on
www.eicta.org/index.php?id=995
achieved
Vishay Beyschlag
6
is
www.vishay.com/doc?91000
10 m; I
0.22  to 0.91 
0.2  to 0.91 
0.1  to 0.2 
1  to 15 M
10  to 1 M
granted
MMB 0207
“Approval
www.vishay.com
(1)
-
-
max.
and the
for
= 5 A
) as
the
17
of