164163-1 TE Connectivity, 164163-1 Datasheet - Page 7

• Manufacturer Part Number: 164163-1
• Description: PIN ASS
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: HTSr

Specifications of 164163-1

• Gender: Pin
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Copper Alloy
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Tin
• Product Depth (mm): 2.9mm
• Product Length (mm): 29.4mm
• Rohs Compliant: YES
• Contact Size: 20
• Contact Termination: Crimp
• Approval Bodies: UL, CSA, SEV
• Cable Diameter Max: 0.56mm
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Regular Wire
• Grade: Commercial
• Make First / Break Last: Yes
• High Current: No
• Termination End Plating: Tin
• Pin Diameter (mm [in]): 1.57 [0.062]
• Wire Range (mm [awg]): 0.20-0.60² [24-20]
• Spring Material: Stainless Steel
• Used With: CPC Connectors
• Contact Type: Pin
• Contact Classification: Ground
• Contact Plating, Mating Area, Material: Tin
• Contact Base Material: Copper Alloy
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.14 – 1.80 [0.045 – 0.071]
• Applies To: Wire/Cable
• Test Current (a): 13.0
• Packaging Method: Loose Piece
• Lead Free Status / RoHS Status: Compliant
• For Use With: Type III+ Series Connectors

Environmentally Protected
Circular Plastic Connectors,
for Mated CPC Connectors
Utilizing Peripheral Seals
and either Wire Entry Seals
(for Discrete Wire
Applications) or Heat
Shrink Boots (for Jacketed
Cable Applications).
Available are Various
Sizes, Series 1, 5 and 6.
IP Codes
Catalog 82021
Revised 7-07
www.tycoelectronics.com
Index Letter
IP
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
AMP Circular Connectors for
Commercial Signal and Power Applications
Internal Protection (IP)
Definition:
I
I
Sample Designation:
(Where x is a numeral value), i.e. IP 65
Protection, X 1
Levels of Protection for Electric Operating Material
According to IEC 60529 and IEC 60947, Appendix C
Per IEC 60947, Appendix C—
Pertains to low voltage switchgear and
control gear.
Per IEC 60529—Pertains to degrees
of protection provided by enclosures
(IP code).
Degree of
1
2
3
4
5
6
against ingress of solid
Degree of Protection
foreign objects
Protection against ingress of dust
>2.5mm diameter including tools
Protection against ingress of
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
>12.5mm—including fingers
Protection against objects
Protection against objects
Protection against objects
Protection against objects
Protection against ingress
X 1
solid foreign objects
including inadvertently
of solid foreign bodies
>1.0mm diameter—
>50mm diameter—
touched by hands
including grains
No Protection
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 52-55-1106-0800
C. America: 57-1-254-4444
Note:
are RoHS Compliant.
Protection, X 2
Degree of
All part numbers
0
1
2
3
4
5
6
7
against ingress of water
Degree of Protection
Temporary immersion—Protection
against temporary flooding due
against temporary immersion
water stream out of a nozzle,
to powerful jet streams out of
Powerful Jetting—Protection
water when the enclosure is
Protection against dripping
Jetting—Protection against
a nozzle from any direction
Protection against vertical
Spraying at an angle up
against water splashed
Splashing—Protection
tilted 15° from vertical
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-208-420-8341
Protection against
X 2
Vertical Dripping—
to 60° from vertical
from any direction
from any direction
ingress of water
Dripping <15°—
drops of water
No Protection
7