AD9517-1BCPZ Analog Devices Inc, AD9517-1BCPZ Datasheet - Page 73

• Manufacturer Part Number: AD9517-1BCPZ
• Description: 12-Output Clock Generator With 2.5GHz VC
• Manufacturer: Analog Devices Inc
• Type: Clock Generator, Fanout Distributionr

Specifications of AD9517-1BCPZ

• Pll: Yes
• Input: CMOS, LVDS, LVPECL
• Output: CMOS, LVDS, LVPECL
• Number Of Circuits: 1
• Ratio - Input:output: 1:12
• Differential - Input:output: Yes/Yes
• Frequency - Max: 2.65GHz
• Divider/multiplier: Yes/No
• Voltage - Supply: 3.135 V ~ 3.465 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 48-LFCSP
• Frequency-max: 2.65GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AD9517-1/PCBZ - BOARD EVAL FOR AD9517-1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Reg.
Addr.
(Hex)
0x19F
0x1A0
0x1A1
0x1A2
Bits
[7:4]
[3:0]
[7:4]
[3:0]
5
4
3
2
1
0
0
Name
Phase Offset Divider 3.2
Phase Offset Divider 3.1
Low Cycles Divider 3.2
High Cycles Divider 3.2
Bypass Divider 3.2
Bypass Divider 3.1
Divider 3 nosync
Divider 3 force high
Start High Divider 3.2
Start High Divider 3.1
Divider 3 DCCOFF
Description
Refer to LVDS/CMOS channel divider function description (default = 0x0).
Refer to LVDS/CMOS channel divider function description (default = 0x0).
Number of clock cycles (minus 1) of 3.2 divider input during which 3.2 output stays low.
A value of 0x0 means that the divider is low for one input clock cycle (default = 0x0).
Number of clock cycles (minus 1) of 3.2 divider input during which 3.2 output stays high.
A value of 0x0 means that the divider is high for one input clock cycle (default = 0x0).
Bypass (and power-down) 3.2 divider logic; route clock to 3.2 output.
0: do not bypass (default).
1: bypass.
Bypass (and power-down) 3.1 divider logic; route clock to 3.1 output.
0: do not bypass (default).
1: bypass.
Nosync.
0: obey chip-level SYNC signal (default).
1: ignore chip-level SYNC signal.
Force Divider 3 output high. Requires that nosync also be set.
0: force low (default).
1: force high.
Divider 3.2 start high/low.
0: start low (default).
1: start high.
Divider 3.1 start high/low.
0: start low (default).
1: start high.
Duty-cycle correction function.
0: enable duty-cycle correction (default).
1: disable duty-cycle correction.
Rev. B | Page 73 of 80
AD9517-1