AD9640ABCPZ-150 Analog Devices Inc, AD9640ABCPZ-150 Datasheet - Page 4

• Manufacturer Part Number: AD9640ABCPZ-150
• Description: 14Bit 150Msps Dual 1.8V PB Free ADC
• Manufacturer: Analog Devices Inc

Specifications of AD9640ABCPZ-150

• Design Resources: Interfacing ADL5534 to AD9640 High Speed ADC (CN0049)
• Number Of Bits: 14
• Sampling Rate (per Second): 150M
• Data Interface: Serial, SPI™
• Number Of Converters: 2
• Power Dissipation (max): 938mW
• Voltage Supply Source: Analog and Digital
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 64-LFCSP
• Number Of Elements: 2
• Resolution: 14Bit
• Architecture: Pipelined
• Sample Rate: 150MSPS
• Input Polarity: Bipolar
• Input Type: Voltage
• Rated Input Volt: ±1V
• Differential Input: Yes
• Power Supply Requirement: Analog and Digital
• Single Supply Voltage (typ): 1.8V
• Single Supply Voltage (min): 1.7V
• Single Supply Voltage (max): 1.9V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Differential Linearity Error: -0.95LSB/1.5LSB
• Integral Nonlinearity Error: ±5LSB
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 64
• Package Type: LFCSP EP
• Input Signal Type: Differential
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

AD9640
GENERAL DESCRIPTION
The AD9640 is a dual 14-bit, 80/105/125/150 MSPS analog-to-
digital converter (ADC). The AD9640 is designed to support
communications applications where low cost, small size, and
versatility are desired.
The dual ADC core features a multistage, differential pipelined
architecture with integrated output error correction logic. Each
ADC features wide bandwidth differential sample-and-hold
analog input amplifiers supporting a variety of user-selectable
input ranges. An integrated voltage reference eases design
considerations. A duty cycle stabilizer is provided to compen-
sate for variations in the ADC clock duty cycle, allowing the
converters to maintain excellent performance.
The AD9640 has several functions that simplify the automatic
gain control (AGC) function in the system receiver. The fast detect
feature allows fast overrange detection by outputting four bits of
input level information with very short latency.
Rev. B | Page 4 of 52
In addition, the programmable threshold detector allows moni-
toring of the incoming signal power using the four fast detect
bits of the ADC with very low latency. If the input signal level
exceeds the programmable threshold, the fine upper threshold
indicator goes high. Because this threshold is set from the four
MSBs, the user can quickly turn down the system gain to avoid an
overrange condition.
The second AGC-related function is the signal monitor. This
block allows the user to monitor the composite magnitude of
the incoming signal, which aids in setting the gain to optimize
the dynamic range of the overall system.
The ADC output data can be routed directly to the two external
14-bit output ports. These outputs can be set from 1.8 V to 3.3 V
CMOS or 1.8 V LVDS.
Flexible power-down options allow significant power savings,
when desired.
Programming for setup and control is accomplished using a
3-bit SPI-compatible serial interface.
The AD9640 is available in a 64-lead LFCSP and is specified
over the industrial temperature range of −40°C to +85°C.