CABLE-SMBUS-3PINZ Analog Devices Inc, CABLE-SMBUS-3PINZ Datasheet - Page 3
![no-image](/images/manufacturer_photos/0/0/57/analog_devices_inc_sml.jpg)
CABLE-SMBUS-3PINZ
Manufacturer Part Number
CABLE-SMBUS-3PINZ
Description
3 PIN SMBUS CABLE (ROHS)
Manufacturer
Analog Devices Inc
Specifications of CABLE-SMBUS-3PINZ
Accessory Type
SMBus Cable
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
EVALADM106x Boards
Lead Free Status / Rohs Status
Supplier Unconfirmed
Part Number
Preliminary Technical Data
ADM1062-69 FAMILY DESCRIPTION
These devices also provide up to ten programmable inputs for
monitoring Under, Over, or out-of-window faults on up to ten
supplies. In addition, up to ten programmable outputs are
provided. These can be used as logic enables. Six of them can
also provide up to a +12V output for driving the gate of an N-
Channel FET which may be placed in the path of a supply.
The logical core of the device is a Sequencing Engine. This is a
state machine based construction, providing up to 63 different
states. This enables very flexible sequencing of the outputs,
based on the condition of the inputs.
In addition to these functions, the ADM1062/3/4/6/9 integrate a
12-bit ADC. This allows read-back of the voltage on up to 12
rails. An extra level of UV or OV monitoring can also be
provided with the ADC.
Table 3. ADM106x Selection Guide (in decreasing order of functionality)
1
sensors
2
ADC)
ADM1062
ADM1066
ADM1063
ADM1064
ADM1067
ADM1065
ADM1069
ADM1068
ADM1063 has differential inputs for two external temperature
ADM1067 provides Open Loop Margining (DAC’s but no
12 (4 VPn + VH + 5 Vx + 2
10 (4 VPn + VH + 5 Vx)
10 (4 VPn + VH + 5 Vx)
10 (4 VPn + VH + 5 Vx)
10 (4 VPn + VH + 5 Vx)
10 (4 VPn + VH + 5 Vx)
8 (4 VPn + VH + 3 Vx)
8 (4 VPn + VH + 3 Vx)
Inputs
AUX)
8 (6 FET Drivers)
8 (6 FET Drivers)
10 (6 FET
10 (6 FET
10 (6 FET
10 (6 FET
10 (6 FET
10 (6 FET
Outputs
Drivers)
Drivers)
Drivers)
Drivers)
Drivers)
Drivers)
Rev. PrB | Page 3 of 38
Input Accuracy
1%
1%
1%
1%
1%
1%
1%
1%
The ADM1062/6/7/9 also have 8-bit voltage output DACs.
These circuits can be used to implement an open-loop
margining system that enables supply adjustment by altering
either the feedback node or reference of a dc/dc converter using
the DAC outputs. For parts with ADC also present a more
comprehensive closed-loop margining circuit can be
implemented.
Temperature measurement is possible with the ADM1062/3.
The ADM1062 contains one internal temperature sensor and a
differential input for a remote thermal diode. The ADM1063
contains an additional differential input for a second remote
thermal diode. These are measured using the 12- bit ADC.
The device is controlled via configuration data that can be
programmed into an EEPROM. The whole configuration can
be programmed using an intuitive GUI-based software package
provided by ADI.
Readback
Yes
Yes
Yes
Yes
Yes
Margining
Yes
Yes
Yes
Yes
2
EVAL-ADM106x
Sensing
Temp
Yes
Yes
1
40 LFCSP/
40 LFCSP/
40 LFCSP/
40 LFCSP/
40 LFCSP/
40 LFCSP/
48 TQFP
48 TQFP
48 TQFP
48 TQFP
48 TQFP
48 TQFP
32 LQFP
32 LQFP
Package