CS8421-CNZR Cirrus Logic Inc, CS8421-CNZR Datasheet - Page 32
![no-image](/images/manufacturer_photos/0/1/141/cirrus_logic_inc_sml.jpg)
CS8421-CNZR
Manufacturer Part Number
CS8421-CNZR
Description
IC,Digital Audio Sample Rate Converter,CMOS,LLCC,20PIN
Manufacturer
Cirrus Logic Inc
9. APPLICATIONS
9.1
When RST is low the CS8421 enters a low power mode, all internal states are reset, and the outputs are
disabled. After RST transitions from low to high the part senses the resistor value on the configuration
pins (MS_SEL, SAIF, and SAOF) and sets the appropriate mode of operation. After the mode has been
set (approximately 4 µs) the part is set to normal operation and all outputs are functional.
9.2
The CS8421 operates from a VD = +2.5 V and VL = +3.3 V or +5.0 V supply. These supplies may be set
independently. Follow normal supply decoupling practices, see Figure 5.
Extensive use of power and ground planes, ground plane fill in unused areas, and surface mount decou-
pling capacitors are recommended. Decoupling capacitors should be mounted on the same side of the
board as the CS8421 to minimize inductance effects and all decoupling capacitors should be as close to
the CS8421 as possible. The pin of the configuration resistors not connected to MS_SEL, SAIF, and
SAOF should be connected as close as possible to VL or GND.
32
Reset, Power Down, and Start-up
Power Supply, Grounding, and PCB layout
CS8421
DS641PP1