DSPIC33FJ32GS608T-I/PT Microchip Technology, DSPIC33FJ32GS608T-I/PT Datasheet - Page 187

• Manufacturer Part Number: DSPIC33FJ32GS608T-I/PT
• Description: 16 Bit MCU/DSP 40MIPS 32KB FLASH 80 TQFP 12x12x1mm T/R
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32GS608T-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, QEI, POR, PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 18x10b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.0
 2010 Microchip Technology Inc.
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
OSCILLATOR
CONFIGURATION
of the dsPIC33FJ32GS406/606/608/610
and
families of devices. It is not intended to be
a comprehensive reference source. To
complement the information in this data
sheet, refer to Section 42. “Oscillator
(Part IV)” (DS70307) in the “dsPIC33F
Family Reference Manual”, which is
available from the Microchip web site
(www.microchip.com).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
dsPIC33FJ64GS406/606/608/610
Preliminary
The
dsPIC33FJ64GS406/606/608/610 oscillator system
provides:
• External and internal oscillator options as clock
• An on-chip Phase-Locked Loop (PLL) to scale the
• An internal FRC oscillator that can also be used with
• Clock switching between various clock sources
• Programmable clock postscaler for system power
• A Fail-Safe Clock Monitor (FSCM) that detects
• A Clock Control register (OSCCON)
• Nonvolatile Configuration bits for main oscillator
• Auxiliary PLL for ADC and PWM
A simplified diagram of the oscillator system is shown
in Figure 9-1.
sources
internal operating frequency to the required
system clock frequency
the PLL, thereby allowing full-speed operation
without any external clock generation hardware
savings
clock failure and takes fail-safe measures
selection.
dsPIC33FJ32GS406/606/608/610
DS70591C-page 187
and