EPM7064SLC84-7N Altera, EPM7064SLC84-7N Datasheet - Page 17
![MAX 7000/S/AE/B](/photos/37/13/371349/544-84-plcc_sml.jpg)
EPM7064SLC84-7N
Manufacturer Part Number
EPM7064SLC84-7N
Description
MAX 7000/S/AE/B
Manufacturer
Altera
Datasheet
1.EPM7064SLC84-7N.pdf
(66 pages)
Specifications of EPM7064SLC84-7N
Family Name
MAX 7000S
Memory Type
EEPROM
# Macrocells
64
Number Of Usable Gates
1250
Frequency (max)
166.7MHz
Propagation Delay Time
7.5ns
Number Of Logic Blocks/elements
4
# I/os (max)
68
Operating Supply Voltage (typ)
5V
In System Programmable
Yes
Operating Supply Voltage (min)
4.75V
Operating Supply Voltage (max)
5.25V
Operating Temp Range
0C to 70C
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Pin Count
84
Package Type
PLCC
Lead Free Status / Rohs Status
Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
EPM7064SLC84-7N
Manufacturer:
ALTERA/阿尔特拉
Quantity:
20 000
Altera Corporation
f
For more information on using the Jam language, refer to AN 122: Using
Jam STAPL for ISP & ICR via an Embedded Processor.
The ISP circuitry in MAX 7000S devices is compatible with IEEE Std. 1532
specification. The IEEE Std. 1532 is a standard developed to allow
concurrent ISP between multiple PLD vendors.
Programming Sequence
During in-system programming, instructions, addresses, and data are
shifted into the MAX 7000S device through the TDI input pin. Data is
shifted out through the TDO output pin and compared against the
expected data.
Programming a pattern into the device requires the following six ISP
stages. A stand-alone verification of a programmed pattern involves only
stages 1, 2, 5, and 6.
1.
2.
3.
4.
5.
6.
Enter ISP. The enter ISP stage ensures that the I/O pins transition
smoothly from user mode to ISP mode. The enter ISP stage requires
1 ms.
Check ID. Before any program or verify process, the silicon ID is
checked. The time required to read this silicon ID is relatively small
compared to the overall programming time.
Bulk Erase. Erasing the device in-system involves shifting in the
instructions to erase the device and applying one erase pulse of
100 ms.
Program. Programming the device in-system involves shifting in the
address and data and then applying the programming pulse to
program the EEPROM cells. This process is repeated for each
EEPROM address.
Verify. Verifying an Altera device in-system involves shifting in
addresses, applying the read pulse to verify the EEPROM cells, and
shifting out the data for comparison. This process is repeated for
each EEPROM address.
Exit ISP. An exit ISP stage ensures that the I/O pins transition
smoothly from ISP mode to user mode. The exit ISP stage requires
1 ms.
MAX 7000 Programmable Logic Device Family Data Sheet
17