KSZ8842-PMBL AM Micrel Inc, KSZ8842-PMBL AM Datasheet - Page 86

• Manufacturer Part Number: KSZ8842-PMBL AM
• Description: 2-Port Ethernet Switch/Repeater + 32-bit/33MHz PCI Bus Interface( )
• Manufacturer: Micrel Inc

Specifications of KSZ8842-PMBL AM

• Controller Type: Ethernet Switch Controller
• Interface: PCI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFBGA
• Number Of Primary Switch Ports: 2
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Phy/transceiver Interface: MII
• Power Supply Type: Analog/Digital
• Data Rate (typ): 10/100Mbps
• Vlan Support: Yes
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Jtag Support: No
• Operating Supply Voltage (max): 3.5V
• Operating Supply Voltage (min): 3.1V
• Operating Temperature Classification: Industrial
• Data Rate: 100Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1636 - BOARD EVALUATION KSZ8842-PMQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Supplier Unconfirmed, Lead free / RoHS Compliant
• Other names: 576-3348

Micrel, Inc.
Port 2 VID Control Register (Offset 0x0524): P2VIDCR
This register contains the global per port control for the switch port 2 function.
October 2007
Note: P2VIDCR serve two purposes:
15 – 13
11 – 0
2 – 0
Bit
Bit
12
8
7
6
5
4
3
(1) Associated with the ingress untagged packets, and used for egress tagging.
(2) Default VID for the ingress untagged or null-VID-tagged packets, and used for address look up.
Default
Default
0x001
111
000
0
0
0
0
0
0
0
R/W
R/W
R/W
RW
RW
RW
RW
RW
RW
RW
RW
RW
Description
User Priority bits
Port 2 tag [15-13] for priority
CFI bit
Port 2 tag [12] for CFI
VID bits
Port 2 tag [11-0] for VID
Learning disable
1 = disable switch address learning capability
0 = enable switch address learning
Sniffer port
1 = Port is designated as sniffer port and will transmit packets that are
monitored.
0 = Port is a normal port
Receive sniff
1 = All the packets received on the port will be marked as “monitored
packets” and forwarded to the designated “sniffer port”
0 = no receive monitoring
Transmit sniff
1 = All the packets transmitted on the port will be marked as “monitored
packets” and forwarded to the designated “sniffer port”
0 = no transmit monitoring
User Priority Field
1 = if the packet’s “user priority field” is greater than the “user priority bits”
in port 2’s VID Control register bits [15:13], replace the packet’s “user
priority field” with the “user priority bits” in port 2’s VID Control register bits
[15:13].
0 = do not compare and replace the packet’s ‘user priority field”
Port VLAN membership
Define the port’s Port VLAN membership. Bit 2 stands for port 3, bit 1 for
port 2, and bit 0 for port 1. The Port can only communicate within the
membership. An ‘1’ includes a port in the membership; an ‘0’ excludes a
port from the membership.
Description
Reserved
86
KSZ8842-PMQL/PMBL
M9999-100207-1.5