KSZ8893FQL-FX Micrel Inc, KSZ8893FQL-FX Datasheet - Page 32

• Manufacturer Part Number: KSZ8893FQL-FX
• Description: 2+1 Port 10/100 Switch W/Tranceivers & Frame Buffers, ( )
• Manufacturer: Micrel Inc

Specifications of KSZ8893FQL-FX

• Controller Type: Ethernet Switch Controller
• Interface: MII, RMII, SNI
• Voltage - Supply: 3.1 V ~ 3.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 128-MQFP, 128-PQFP
• Number Of Primary Switch Ports: 3
• Internal Memory Buffer Size: 32
• Operating Supply Voltage (typ): 3.3V
• Fiber Support: Yes
• Integrated Led Drivers: Yes
• Power Supply Type: Analog/Digital
• Package Type: PQFP
• Vlan Support: Yes
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Pin Count: 128
• Mounting: Surface Mount
• Jtag Support: No
• Operating Temperature Classification: Commercial
• Data Rate: 1000Mbps
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 576-1603 - EVAL KIT EXPERIMENTAL KSZ8893MQL
• Current - Supply: -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 576-3273

Micrel, Inc.
KSZ8893FQL
Auto-Negotiation
The KSZ8893FQL conforms to the auto-negotiation protocol, as defined in Clause 28 of the IEEE 802.3u specification.
Auto-negotiation allows unshielded twisted pair (UTP) link partners to select the best common mode of operation. In
auto-negotiation, link partners advertise their capabilities across the link to each other. If auto-negotiation is not
supported or the KSZ8893FQL link partner is forced to bypass auto-negotiation, then the KSZ8893FQL sets its
operating mode by observing the signal at its receiver. This is known as parallel detection, and allows the KSZ8893FQL
to establish link by listening for a fixed signal protocol in the absence of auto-negotiation advertisement protocol.
The link up process is shown in the following flow diagram.
Figure 6. Auto-Negotiation and Parallel Operation
32
October 2007
M9999-101607-1.3