MTCMR-C1-GP-N3 Multi-Tech Systems, MTCMR-C1-GP-N3 Datasheet - Page 58
![no-image](/images/no-image-200.jpg)
MTCMR-C1-GP-N3
Manufacturer Part Number
MTCMR-C1-GP-N3
Description
MODEM CELLULAR DUAL CDMA
Manufacturer
Multi-Tech Systems
Series
MultiModem® iCellr
Datasheets
1.SF100-G.pdf
(4 pages)
2.MTCBA-C1-N16.pdf
(135 pages)
3.MTCMR-E1.pdf
(16 pages)
4.MTCMR-E1.pdf
(79 pages)
5.MTCMR-E1.pdf
(2 pages)
6.MTCMR-C1-N2.pdf
(2 pages)
Specifications of MTCMR-C1-GP-N3
Function
Transceiver, CDMA, Modem
Modulation Or Protocol
CDMA2000
Frequency
800MHz, 1.9GHz, 1575.42MHz
Applications
Verizon™ Networks (USA)
Interface
RS-232, USB
Sensitivity
-161dB
Data Rate - Maximum
153.6kbps
Voltage - Supply
9 V ~ 32 V, USB
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1097
Access Overload Class +WAOC
Description:
specifically to modify the AOC value, it will retain this value and will not be automatically updated via the WIMI or
WMDN commands. Otherwise, if the AOC has not been modified via the WAOC command, it will be automatically
updated to be the last digit of the MDN (WMDN) or IMSI (WIMI) when the commit (WCMT=1) command is issued.
Syntax:
Values:
Commit Changes +WCMT
Description:
Syntax:
Values:
Set IMSI +WIMI
Description:
Syntax:
Multi-Tech Systems, Inc. CDMA C1 AT Commands Reference Guide (PN S000478C)
This command is used to set the Access Overload Class. If the +WAOC command is used
Command syntax: AT+WAOC=<number>
<number>
This command is used to commit or to undo/revert any changes done during the service
programming session. Changes performed during this session will not take place until a commit
command has been sent (AT+WCMT=1). Commission of these changes will force a software
reset of the modem. Sending this command indicates this service provisioning session is
complete. In order to perform any subsequent provisioning, the service programming code must
be entered using the +WSPC command.
Command syntax: AT+WCMT=<val>
<val>
This command is used to set the IMSI. S valid IMSI is 15 digits in length: MCC (3), MNC (2),
MIN2 (3), MIN1 (7). For support of Wireless Number Portability, changes to the IMSI will NOT
update the MDN. If the MDN is modified via the WMDN command, the IMSI_M portion of the IMSI
will be automatically updated to the least significant 10 digits of the MDN, but the update will not
be visible or applied until the commit command is issued via the WCMT command. Changes to
the IMSI will automatically update Access Overload Class values unless specifically modified
using +WAOC.
Command syntax: AT+WIMI=<number>
Command
AT+WAOC?
Note: Get current Access Overload Class
AT+WAOC=7
Note: Set Access Overload Class to 7
Command
AT+WCMT=0
Note: Undo any changes performed during this
provisioning AT session
AT+WCMT=1
Note: Commit all changes performed during this
provisioning AT session to non-volatile memory.
Command
AT+WIMI?
Note: Get current IMSI
AT+WIMI=310008585551212
Note: Set IMSI to 310008585551212
0
1
undo changes
commit changes
Access overload value range:
0 to 15
Possible Responses
+WAOC: 5
OK
OK
Possible Responses
+WIMI: 310008581111111
OK
OK
Chapter 11 – Provisioning Control Commands
Possible Responses
OK
OK
Note: software reset is performed
58