MTCBA-H4-EN2-P2-NAM Multi-Tech Systems, MTCBA-H4-EN2-P2-NAM Datasheet - Page 36
![no-image](/images/no-image-200.jpg)
MTCBA-H4-EN2-P2-NAM
Manufacturer Part Number
MTCBA-H4-EN2-P2-NAM
Description
ROUTER WIRELESS QUAD HSPA
Manufacturer
Multi-Tech Systems
Series
MultiModem® rCellr
Datasheets
1.SF100-G.pdf
(4 pages)
2.MTCMR-E1.pdf
(16 pages)
3.MTCMR-E1.pdf
(79 pages)
4.MTCMR-H4-P1.pdf
(147 pages)
5.MTCBA-H4-EN2-P2.pdf
(2 pages)
Specifications of MTCBA-H4-EN2-P2-NAM
Function
Transceiver, HSPA, Router
Modulation Or Protocol
GPRS, GSM, EDGE
Frequency
850MHz, 900MHz, 1.8GHz, 1.9GHz
Applications
AT&T Networks (USA)
Interface
RJ-45, RS-232
Features
US Power Cord
Voltage - Supply
9 V ~ 32 V
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1095
Chapter 4 – Using the Web Management Software
Submit
Note:
changes.
PPP > Wakeup-On-Call Examples
Example 1 – Set Up the Ethernet Router to Activate on Incoming SMS Message
36
You must click Save and Restart once you have completed and submitted all the screens on which you have made
changes. The device will save all the settings and reboot the PC.
Caller ID Configuration
Caller Acknowledgement Configuration
Click the SUBMIT button to save these settings.
1.
2.
You must click Save and Restart once you have completed and submitted all the screens on which you have made
Add “Wakeup on Call” Caller ID:
Acknowledgement String to Caller:
On the
PPP General
●
●
●
Authentication
●
Modem Configuration
●
●
Submit
●
On the
Wakeup-on-Call Configuration
●
●
●
●
Caller ID Configuration
●
●
Caller Acknowledgement Configuration
●
●
Make sure that PPP is Enabled (the default).
Make sure Dial-on-Demand is Enabled (the default).
Set the Idle Time Out to the number of seconds you desire.
Your wireless service provider may require you to have a separate PPP Username and Password. If so, enter
them here.
when you activated your account.
Make sure your Dial Number is entered correctly:
Enter your APN. The APN is assigned by your wireless service provider.
Example: AT+CGDCONT=1,"IP","Internet" The Example: AT+CGDCONT=1,”IP”,”Internet” needs to be removed.
Just the APN name needs to be entered in the APN field.
Click the Submit button to save the changes made on this screen.
Select Enable for Wakeup-on-Call.
Set the Time Delay. You can use the 10 second default.
Enter the Init Strings from the model dependent table described in the Wakeup-on-Call Configuration.
Click the Submit button to save these settings.
Enter an SMS that you want added to the Caller ID list.
Note:
between words. When the configured string matches the SMS message string, it will activate the Wakeup-on-Call
feature.
Add Button
Click the Add button to save each message as it is entered into the Caller ID list.
Enter a configured string (0 to 40 characters) that will be sent to the integrated cellular modem upon receiving a
valid Caller ID from the WAN.
Set the Wakeup Acknowledgement string configuration with the command at+cnma
Click the Submit button to save the Acknowledgement Configuration.
PPP > PPP Configuration
PPP > Wakeup-on-Call
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
Add the SMS message string into the Caller ID list. The SMS message string must not contain any spaces
Note:
allowed to wakeup the router. Enter ‘RING’ (all Caps) to wake up on any call. Enter a CID phone
number or an SMS message. The SMS message string must not contain any spaces between
words.
After entering the Caller ID, click the Add button. The Caller ID displays at the bottom of screen.
You can enter any number of IDs you desire.
A Caller ID can be edited or deleted using Options, which will be available once a Caller ID is
displayed.
modem upon receiving a valid caller ID from the WAN. The default is NULL string.
Note:
caller ID reception.
If a username and password are required, your wireless provider would have given them to you
If the string is not configured, acknowledgement to the caller will not be sent upon successful
screen, set up the following parameters:
screen, set up the following parameters:
To add Caller ID to the Wakeup-on-Call function, enter the Caller ID to be
The configured string of (0 to 40 characters) will be sent to the integrated cellular
Multi-Tech Systems, Inc. MultiModem rCell User Guide