FLUKE-114 Fluke Electronics, FLUKE-114 Datasheet - Page 17
FLUKE-114
Manufacturer Part Number
FLUKE-114
Description
MULTMETR ELEC DMM 6000CNT 600V
Manufacturer
Fluke Electronics
Series
11xr
Type
Digital (DMM), Testerr
Specifications of FLUKE-114
Includes
Battery, Test Leads
Style
Handheld
Display Digits
3.75
Display Type
LCD, Bar Graph
Display Count
6000
Function
Voltage, Resistance
Functions, Extra
Continuity
Features
Backlight, Hold, Min/Max/Ave, Sleep
Ranging
Auto/Manual
Response
True RMS
Lead Free Status / RoHS Status
Vendor undefined / RoHS compliant by exemption
Other names
2538783
614-1009
614-1009
To detect the presence of ac voltage, place the top of the
Meter close to a conductor. The Meter gives an audible as
well as visual indication when voltage is detected. There
are two sensitivity settings. The “Lo” setting can be used
on flush mounted wall sockets, power strips, flush
mounted industrial outlets and various power cords. The
“Hi” setting allows for ac voltage detection on other styles
of recessed power connectors or sockets where the actual
ac voltage is recessed within the connector itself. The
VoltAlert detector works in bare wire applications with
voltages as low as 24 V in the “Hi” setting.
Making Low Impedance Capacitance
Measurements (115 & 117 only)
For making capacitance measurements on cables with
ghost voltage, hold qwhile turning on the Meter to
switch the Meter into LoZ, (low input impedance)
Capacitance mode. In this mode, capacitance
measurements will have a lower accuracy and lower
dynamic range. This setting is not saved when the Meter is
turned off or goes into sleep mode.
If there is no indication, voltage could
still be present. Do not rely on the
VoltAlert detector with shielded wire.
Operation may be effected by
differences in socket design,
insulation thickness and type.
XW Warning
Testing Diodes (115 & 117)
Forward Bias
Good Diode
Open
Bad Diode
Making Basic Measurements
Single
Beep
True-rms Multimeters
Reverse Bias
Shorted
Good Diode
and
Bad Diode
edy07f.eps
15