275 TPI (Test Products Int), 275 Datasheet - Page 25

• Manufacturer Part Number: 275
• Description: DGTL CLAMP-ON W/11,000 CNT DISP
• Manufacturer: TPI (Test Products Int)
• Series: 275r
• Type: Digital (DMM)r

Specifications of 275

• Includes: Battery, Case, Fuse, Temperature Probe, Test Leads
• Style: Clamp
• Display Digits: 4.5
• Display Type: LCD, Bar Graph
• Display Count: 11000
• Function: Voltage, Current, Resistance, Capacitance, Temperature, Frequency
• Functions, Extra: Continuity, Diode Test
• Features: Auto Off, Hold, Min/Max, Record, Voltage Indicator
• Ranging: Auto/Manual
• Response: True RMS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

E. Other Features
Non-Contact Voltage (NCV)
Measurement Procedure:
Remove the test leads and temperature probe prior to using the
NCV feature.
1. Turn the meter on to any range.
2. Press and hold the NCV button.
3. Put the arrow marked on the jaw close to the wire under
4. If voltage is present the 275 will beep and the NCV LED
5. If voltage is not detected, confirm the result by perform-
Instrument set-up:
FUNC.
NCV
WARNING!
Never rely on the non-contact voltage function only. If a volt-
age is not detected, confirm there is no voltage by performing
a voltage measurement with the test leads. Failure to do this
could result in injury. The non-contact voltage feature works
best when testing single wires. Make sure the test leads and
temperature probe are disconnected while using the NCV fea-
ture.
test.
will illuminate.
ing a voltage measurement as outlined earlier in this
manual.
BLACK
TEST LEAD
N/A
RED
TEST LEAD
N/A
25