FLUKE-27YEL Fluke Electronics, FLUKE-27YEL Datasheet - Page 5
![no-image](/images/no-image-200.jpg)
FLUKE-27YEL
Manufacturer Part Number
FLUKE-27YEL
Description
MULTIMETER YELLOW COLOR
Manufacturer
Fluke Electronics
Series
TouchHold®, 20r
Type
Digital (DMM)r
Datasheet
1.FLUKE-27YEL.pdf
(30 pages)
Specifications of FLUKE-27YEL
Includes
Battery, Clips, Test Leads
Style
Handheld
Display Digits
3.75
Display Type
LCD, Bar Graph
Display Count
3200
Function
Voltage, Current, Resistance
Functions, Extra
Continuity, Diode Test
Features
Hold, MIN/MAX
Ranging
Auto/Manual
Response
Average
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
739169
Multimeter Safety
Read this information before using the meter. This meter
complies with EN 61010-1:1993, ANSI/ISA S82.01-1994
and CAN/CSR C22.2 No. 1010.1-92 Overvoltage
Category III. Use the meter only as specified in this Users
Manual, otherwise the protection provided by the meter
may be impaired.
To avoid possible electric shock or personal
injury:
A Warning identifies conditions and actions that
pose hazard(s) to the user.
A Caution identifies conditions and actions that
may damage the meter or the equipment under
test.
Inspect the meter before using it. Check
for cracks, missing plastic, or other
possible damage to the case. Make sure
that the insulation surrounding the
connectors is intact.
Inspect the test leads for damaged
insulation, exposed metal, and continuity.
Replace damaged test leads before using
the meter.
W Warnings
Do not use the meter if it operates
abnormally. Protection may be impaired.
When in doubt, have the meter serviced.
Do not operate the meter around
explosive gas, vapor or dust.
Do not apply more than the rated voltage
(1000 V) between terminals or between
any terminal and earth ground. The rated
voltage is marked on the meter.
Before each use, verify the meter’s
operation by measuring a known voltage.
Use only specified replacement parts.
Use caution when working above 30 V ac
rms, 42 V ac peak, or 60 V dc. Such
voltages pose a shock hazard.
When using the probes, always place
fingers behind the probe finger guards.
Connect the common test lead before
connecting the live test lead. When
disconnecting test leads, disconnect the
live test lead first.
Make sure the battery door is secured
before operating the meter.
Multimeter Safety
1