EP12SD1SAPE C&K Components, EP12SD1SAPE Datasheet - Page 5

• Manufacturer Part Number: EP12SD1SAPE
• Description: Pushbutton
• Manufacturer: C&K Components
• Type: Momentary Contactr

Specifications of EP12SD1SAPE

• Pole Throw Configuration: SPDT
• Switch Configuration: ON Mom
• Actuator Style: Round Plunger
• Ac Voltage Rating (max): 20VVAC
• Dc Voltage Rating (max): 20VVDC
• Contact Material: Copper Alloy
• Contact Plating: Gold/Nickel
• Product Height (mm): 5.72mm
• Product Length (mm): 10.41mm
• Operating Temp Range: -30C to 85C
• Mounting Style: Surface Mount
• Terminal Type: Gull Wing
• Illumination Type: Not Required
• Mounting: Surface Mount
• Maximum Power Rating: 0.4@20VAC 20VDC VA
• Maximum Dc Voltage Rating: 20 V
• Contact Form: SPDT
• Switch Function: ON - (ON)
• Illumination: Not Illuminated
• Contact Rating: 0.4 Volt-Amp at 20 Volts
• Termination Style: Solder
• Ip Rating: IP57
• Actuator: Plunger
• Flammability Rating: UL 94 V-0
• Body Shape: Rectangular
• Dielectric Strength: 1000 Volts
• Housing Material: Liquid Crystal Polymer, Glass Filled
• Insulation Resistance: 1000 MOhms
• Mounting Angle: Right
• Terminal Seal: Epoxy
• Lead Free Status / Rohs Status: Compliant

1
2
3
4
5
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
V3
V31
V3
E
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
END CONTACTS: Coin silver, with gold plate over nickel plate.
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
END CONTACTS: Coin silver, silver plated.
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
EPOXY SEAL
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET
VERTICAL MOUNT, V-BRACKET, SNAP-IN
OPTION
CODE
B
Q
G
R
P
S
omit terminal 2.
EP11 Models:
GOLD OVER SILVER
MATERIAL
CONTACT
SILVER
GOLD
1
4,5
CONTACT MATERIAL
TERMINATIONS
2,3
V31 SNAP-IN
MATTE-TIN
MATTE-TIN
MATTE-TIN
TERMINAL
PLATING
SILVER
GOLD
GOLD
SEAL
3
1
5
6
6
6
LOW LEVEL/DRY CIRCUIT
A-13
CIRCUIT OR POWER
6
NOTE: Any models supplied with Q, B P, S ,R or G contact material are RoHS compliant.
All models
Sealed Tiny Pushbutton Switches
TERMINALS: Copper alloy, with matte tin over nickel plate.
LOW LEVEL/DRY
POWER
with all options when ordered with G, S, R or Q contact material.
RATINGS
0.4 VA MAX @ 20 V AC OR DC MAX. OR
0.4 VA MAX. @ 20 V AC OR DC MAX.
1 AMP @ 120 V AC OR 28 V DC.
1 AMP @ 120 V AC OR 28 V DC.
PC MOUNTING
omit centerhole.
EP11 Models:
PC MOUNTING
Specifications and dimensions subject to change
www.ck-components.com
Dimensions are shown: Inches (mm)
EP Series
EP12SD1V3BE
SPDT
EP21SD1V3BE
DPST
Third Angle
Projection
A