A3PA-5050 Omron, A3PA-5050 Datasheet - Page 7

• Manufacturer Part Number: A3PA-5050
• Description: SWITCH GUARD
• Manufacturer: Omron
• Series: A3Pr

Specifications of A3PA-5050

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: A3PA Series Lighted Pushbutton Switches
• Lead Free Status / Rohs Status: Details

A3PA
3. Removing/Mounting Lens
4. Mounting Light Baffle (2-split Screen Type Only)
5. Mounting Colored Plate
6. Mounting Switch Onto Panel
Slide the lens along the slide tracks of plunger case with its
open side facing the positive lens lock.
While holding the plunger case of the display screen unit, in-
sert the light baffle into the interior groove of the plunger case.
After mounting the light baffle, place the colored plate on the
plunger case with the dull side of the colored plate facing
downward. Be sure that the projection on the upper surface of
the colored plate faces outward.
Individual Mounting
When the mounting switch unit, push the switch unit into the
panel cutout from front of the mounting panel by holding the
switch unit with the logo mark ‘‘OMRON” facing downward.
The switch unit will snap into place.
7. Mounting Flange, Barriers and Replacement of the
8. Mounting Seal Cover
Multiple Mounting
After inserting each switch unit into the plate cutout, insert the
spacing barrier in between the two switch units.
Spring Mounting Clip
Mount each part by pushing it in the direction of the arrow
shown in the corresponding illustration below.
Replacing Spring Mounting Clip
After mounting the seal cover onto the flange of the switch
unit, push the switch unit into the panel cutout.
Removal
To remove the spring
mounting clip, pull it.
Mounting
A3PA
7