C200H-CN221 Omron, C200H-CN221 Datasheet - Page 63

• Manufacturer Part Number: C200H-CN221
• Description: C200H I/O CABLE, 2M (COO)
• Manufacturer: Omron

Specifications of C200H-CN221

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5-3
Duct Work
Duct Work
If power cables carrying more than 10 A 400 V, or 20 A 220 V must be run along-
side the I/O wiring (that is, in parallel with it), at least 300 mm must be left be-
tween the power cables and the I/O wiring as shown below.
Where:
3. Loosen the screws attaching the Mounting Brackets to the Backplane. Slide
the Backplane upward as shown below so that the Mounting Bracket and
Backplane clamp securely onto the DIN Rail. Tighten the screws.
Hold-down bracket
2 = General control wiring
3 = Power cables
1 = I/O wiring
Low current cable
Control cable
Power cable
1
2
3
Projections
Grounding at resistance
of less than 100 W
300 mm min.
300 mm min.
Slide this screw to the top of the
projection and then tighten it.
DIN Rail Mounting Bracket
DIN Rail
Section
5-3
49