C200H-DIN01 Omron, C200H-DIN01 Datasheet - Page 17

• Manufacturer Part Number: C200H-DIN01
• Description: C200H DIN RAIL ADAPTER
• Manufacturer: Omron

Specifications of C200H-DIN01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

J I/O Allocations
CS1D I/O allocations are the same as with the CS1. The
only difference is the maximum number of CS1 Special
I/O modules that can be mounted on a PLC. For the
CS1D, the maximum number is 68 units.
J Current Consumption
There is a fixed amount of current and power that can be
provided to the units on the rack. Even when using only
one power supply unit, design the system so that the total
current consumption of units on the rack does not exceed
the values for the maximum power supply unit current and
the maximum total power.
When Duplex power supplies are used, the load for each
CS1D power supply is reduced by approximately half.
Calculate the total current consumption under normal con-
ditions (i.e., with one power supply mounted), taking into
account the load when an error occurs at one of the pow-
er supplies.
CS1D Programmable Controller
J CPU Rack and Expansion Racks
The maximum current and power provided for the CPU
rack and expansion racks is shown below.
Note:
Power
supply unit
supply unit
model
CS1D-
PA207R
Programmable Controller
1. CPU Rack: When making calculations, include the cur-
2. When making calculations, include the current and
rent and power consumption for a duplex CPU back-
plane, a duplex unit and two CS1D power supply units.
power consumption for an online replacement expan-
sion backplane.
Maximum current provided
5 V
(internal
logic pow-
er
supply)
7 A
26 V
(relay pow-
er supply)
1.3 A
Current Consumption
CS1D
24 V
(service
power
supply)
None
Maximum
total power
total power
provided
35 W
C--223