EE-SX4134 Omron, EE-SX4134 Datasheet - Page 4

• Manufacturer Part Number: EE-SX4134
• Description: SMD PHOTOMICROSENSOR (REEL)
• Manufacturer: Omron

Specifications of EE-SX4134

• Sensing Distance: 0.079" (2mm)
• Sensing Method: Transmissive
• Output Configuration: NPN - Open Collector/Light-ON
• Mounting Type: Surface Mount
• Current - Supply: 2.8mA
• Voltage - Supply: 2.2 V ~ 7 V
• Package / Case: 6-SMD
• Aperture Width: 0.3 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Response Time: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: EESX4134

Precautions
■ Soldering Information
Reflow soldering
• The following soldering paste is recommended:
• The recommended thickness of the metal mask for screen printing
• Set the reflow oven so that the temperature profile shown in the fol-
Manual soldering
• Use”Sn 60” (60% tin and 40% lead) or solder with silver content.
• Use a soldering iron of less than 25 W, and keep the temperature
• Solder each point for a maximum of three seconds.
• After soldering, allow the product to return to room temperature
Storage
To protect the product from the effects of humidity until the package
is opened, dry-box storage is recommended. If this is not possible,
store the product under the following conditions:
The product is packed in a humidity-proof envelope. Reflow
soldering must be done within 48 hours after opening the envelope,
during which time the product must be stored under 30 C at 80%
maximum humidity.
If it is necessary to store the product after opening the envelope, use
dry-box storage or reseal the envelope.
Baking
If a product has remained packed in a humidity-proof envelope for
six months or more, or if more than 48 hours have lapsed since the
envelope was opened, bake the product under the following
conditions before use:
is between 0.2 and 0.25 mm.
lowing chart is obtained for the upper surface of the product being
soldered.
of the iron tip at 300 C or below.
before handling it.
1 to 5 C/s
Melting temperature: 216 to 220 C
Composition: Sn 3.5 Ag 0.75 Cu
Temperature: 10 to 30 C
Humidity: 60% max.
Reel: 60 C for 24 hours or more
Bulk: 80 C for 4 hours or more
150 to 180 C
120 sec
Time
1 to 5 C/s
10 sec max.
40 sec max.
260 C max.
255 C max.
230 C max.
EE-SX4134
Photomicrosensor (Transmissive)
139