EE-SY193 Omron, EE-SY193 Datasheet - Page 4

• Manufacturer Part Number: EE-SY193
• Description: PHOTOMICROSENSOR TAPE-N-REEL
• Manufacturer: Omron

Specifications of EE-SY193

• Sensing Distance: 0.039" (1mm)
• Sensing Method: Reflective
• Voltage - Collector Emitter Breakdown (max): 18V
• Current - Collector (ic) (max): 20mA
• Current - Dc Forward (if): 25mA
• Output Type: Phototransistor
• Response Time: 25µs, 30µs
• Mounting Type: Surface Mount
• Package / Case: 4-SMD
• Operating Temperature: -30°C ~ 80°C
• Termination Style: Solder Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: EESY193

Precautions
■ Soldering Information
Reflow soldering
• The following soldering paste is recommended:
• The recommended thickness of the metal mask for screen printing is between 0.2 and 0.25 mm.
• Set the reflow oven so that the temperature profile shown in the following chart is obtained for the upper surface of the product being soldered.
Manual soldering
• Use “Sn 60” (60% tin and 40% lead) or solder with silver content.
• Use a soldering iron of less than 25 W, and keep the temperature of the iron tip at 300°C or below.
• Solder each point for a maximum of three seconds.
• After soldering, allow the product to return to room temperature before handling it.
Storage
To protect the product from the effects of humidity until the package is opened, dry-box storage is recommended. If this is not possible, store the
product under the following conditions:
The product is packed in a humidity-proof envelope. Reflow soldering must be done within 48 hours after opening the envelope, during which time
the product must be stored under 30°C at 80% maximum humidity.
If it is necessary to store the product after opening the envelope, use dry-box storage or reseal the envelope.
Baking
If a product has remained packed in a humidity-proof envelope for six months or more, or if more than 48 hours have lapsed since the envelope
was opened, bake the product under the following conditions before use:
228
Melting temperature: 178 to 192°C
Temperature: 10 to 30°C
Humidity: 60% max.
Reel:60°C for 24 hours or more
Bulk:80°C for 24 hours or more
4°C/s max.
Photomicrosensor (Reflective)
60 to 120 sec
140 to 160°C
4°C/s max.
Time
40 sec. max.
10 sec. max.
220°C max.
EE-SY193