G6AK-274P-STLT-US-DC12 Omron, G6AK-274P-STLT-US-DC12 Datasheet - Page 5

• Manufacturer Part Number: G6AK-274P-STLT-US-DC12
• Description: LOW SIGNAL RELAY
• Manufacturer: Omron
• Series: G6Ar

Specifications of G6AK-274P-STLT-US-DC12

• Relay Type: General Purpose
• Contact Form: DPDT (2 Form C)
• Contact Rating (current): 2A
• Switching Voltage: 250VAC, 220VDC - Max
• Coil Type: Latching, Dual Coil
• Coil Current: -
• Coil Voltage: 12VDC
• Turn On Voltage (max): 8.4 VDC
• Turn Off Voltage (min): -
• Features: -
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Material: Silver (Ag), Gold (Au)
• Operate Time: 5ms
• Release Time: 5ms
• Coil Power: -
• Coil Resistance: -
• Operating Temperature: -40°C ~ 70°C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

■ Characteristics
Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method.
■ Approvals
UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C
Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics
Contact resistance (See note 1)
Operate (set) time
(See note 2)
Release (reset) time
(See note 2)
Min. set/reset signal width DPDT
Operating frequency
Insulation resistance (See note 3)
Dielectric strength
Surge withstand voltage
Vibration
Shock
Ambient temperature
Humidity
Service life
Weight
G6A( )-274P-ST( )-US
2. Values in parentheses are typical values unless otherwise stated.
3. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those for checking the dielectric strength
4. The above values are initial values.
2. In the general interest of product improvement, specifications are subject to change.
(except between the set and reset coil).
individually defined in this catalog.
Type
Type
DPDT
DPDT
4PDT
DPDT
4PDT
4PDT
Mechanical
Electrical
Mechanical durability 10 to 55 Hz; 5 mm double amplitude
Malfunction durability 10 to 55 Hz; 3.3 mm double amplitude
Mechanical durability 1,000 m/s
Malfunction durability DPDT: 500 m/s
Mechanical
Electrical
DPDT
4PDT
Contact form
- DISCONTINUED
- DISCONTINUED
- DISCONTINUED
- DISCONTINUED
1.5 to 48 VDC
50 mΩ max.
5 ms max. (mean value approx. 3 ms)
7 ms max. (mean value approx 3.80 ms)
3 ms max. (mean value approx. 1.20 ms)
5 ms max. (mean value approx. 1.30 ms)
7 ms min.
15 ms min.
36,000 operations/hour
1,800 operations/hour (under rated load)
1,000 MΩ min. (at 500 VDC); except for set-reset
1,000 VAC, 50/60 Hz for 1 minute between coil and contacts
1,000 VAC, 50/60 Hz for 1 minute between contacts of different poles
1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole
250 VAC, 50/60 Hz for 1 minute between set and reset coils
1,500 V (10 x 160 μs) (conforms to FCC Part 68)
-40° to 70°C with no icing
5% to 85% RH
100 million operations min. (at 36,000 operations/hour)
500,000 operations min. (at 1,800 operations/hr) See “Characteristic Data”
Approx. 3.5 g
Approx. 6.0 g
Coil rating
2
(Approx. 100G
Non-latching
2
(Approx. 50 G); 4PDT: 300 m/s
1 A at 125 VAC (General Purpose)
2 A at 30 VDC (General Purpose)
0.6 A at 110 VDC (General Purpose)
Contact ratings
Low Signal Relay
5 ms max. (mean value approx. 2.50 ms)
7 ms max. (mean value approx. 3.30 ms)
5 ms max. (mean value approx. 2.50 ms)
7 ms max. (mean value approx. 2.70 ms)
2
(Approx. 30 G)
6,000
Number of test operations
Latching
G6A
85