Z-15GW22 Omron, Z-15GW22 Datasheet - Page 19

• Manufacturer Part Number: Z-15GW22
• Description: BASIC SWITCH
• Manufacturer: Omron
• Series: Zr

Specifications of Z-15GW22

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 15A @ 125VAC
• Actuator Type: Lever, Roller
• Mounting Type: Chassis Mount
• Termination Style: Solder Lug
• Operating Force: 160gf
• Microswitch Type: Standard
• Actuator Style: Hinge Roller Lever
• Operating Force Max: 160gf
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 250V
• Contact Current Max: 15A
• Actuator: Roller Lever
• Contact Form: SPDT
• Contact Rating: 15 Amps at 250 Volts
• Mounting: Panel
• Pole Throw Configuration: SPDT
• Switch Function Configuration: N.O./N.C.
• Actuator Material: Plastic/Stainless Steel/N/A
• Current Rating (max): 15A
• Ac Voltage Rating (max): 250VVAC
• Dc Voltage Rating (max): 250VVDC
• Contact Material: Silver
• Mechanical Life: 20000000
• Terminal Type: Solder
• Product Height (mm): 38.9mm
• Product Depth (mm): 17.45mm
• Product Length (mm): 49.2mm
• Operating Temp Range: -25C to 80C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Z15GW22

Note: 1. All drawings show the switches with screw terminals. For versions with solder terminals, remove the “-B” from the end of the part number.
Flexible Rod (Coil Spring)
Z-15GNJ55-B
Flexible Rod (Steel Wire)
Z-15HNJS55-B
2. Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions.
(111.3)
(130.1)
100
(13.6)
(13.8)
43.4
16.3
16.3
38
± 0.4
4.2
4.2
(22)
+0.075
+0.075
-0.025
-0.025
PT
PT
4.36
4.36
25.4
25.4
49.2
49.2
23.3
23.3
+0.1
+0.1
-0.05
-0.05
30 Operating range *2
30 Operating range *2
± 0.1
± 0.1
Four, M3 set screws
with hexagonal holes
± 0.25
± 0.25
Rubber cap
Rubber cap
dia.
dia.
11.9
11.9
4.2
4.2
+0.075
+0.075
-0.025
-0.025
dia. hole
dia. hole
1-dia. stainless
steel wire *3
Nylon rod
12 dia.
12 dia.
9.2
9.2
6.1 dia.
3.2 dia.
17.45
17.45
*1
*1
General-purpose Basic Switch
± 0.2
± 0.2
*1. Operation is possible in any direction other than the
*2. Use only the area within the top 30 mm of the rod as
*1. Operation is possible in any direction other than the axial
*2. Use only the area within the top 30 mm of the rod as the
*3. The steel wire can be replaced if damaged.
axial direction (indicated by the arrow
the operating part. (Do not use the area that falls within
80 mm from the mounting hole as the operating part.
Using this area may cause damage to the nylon rod.
direction (indicated by the arrow
operating part. (Do not use the area that falls within 100
mm from the mounting hole as the operating part.
Using this area may cause damage to the steel wire.)
(Model: Lever for HNJS55)
OF max.
PT max.
OF max.
PT max.
TT max.
).
).
Z
(25 mm)
(20 mm)
40 mm
15 gf
50 gf
165