ZB5CL2 SQUARE D, ZB5CL2 Datasheet - Page 7
![no-image](/images/manufacturer_photos/0/6/626/square_d_sml.jpg)
ZB5CL2
Manufacturer Part Number
ZB5CL2
Description
NON-ILLUM EXTENDED SQUARE BLACK
Manufacturer
SQUARE D
Datasheet
1.ZB5CL2.pdf
(8 pages)
Dimensions in in.
A:
B:
General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max.
Installation Precautions
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
(1)
(2)
(2)
(4)
Mounting of Adapter (Socket) ZBZ 01•
1.18 in. min.
1.57 in. min.
● Minimum thickness of circuit board: 1.6 mm / 0.06 in.
● Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
● Orientation of body/fixing collar ZB4 BZ009: ± 2
● Tightening torque of screws ZBZ 006: 0.6 N.m. max.
● Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
Head ZB5 AD•
Panel
Nut
Printed circuit board
● 1 2 elongated holes for ZBZ 006 screw access
● 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
● 3 8 × Ø 1.2 mm / 0.05 in. holes
● 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
● 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
○ every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
○ with each selector switch head (ZB5 AD•, ZB5 AJ•, ZB5 AG•).
°
30’ (excluding cut-outs marked a and b).
7