CPC5622 Clare, CPC5622 Datasheet - Page 14

• Manufacturer Part Number: CPC5622
• Description: LITELINK III, Full-wave Ring Detect
• Manufacturer: Clare

CPC5622
4. Regulatory Information
LITELINK III can be used to build products that comply
with the requirements of TIA/EIA/IS-968 (formerly
FCC part 68), FCC part 15B, TBR-21, EN60950,
UL1950, EN55022B, IEC950/IEC60950, CISPR22B,
EN55024, and many other standards. LITELINK
provides supplementary isolation. Metallic surge
requirements are met through the inclusion of a crow
bar protection device in the application circuit.
Longitudinal surge protection is provided by
LITELINK’s optical-across-the-barrier technology and
the use of high-voltage components in the application
circuit as needed.
5. LITELINK Design Resources
5.1 Clare, Inc. Design Resources
The Clare, Inc. web site has a wealth of information
useful for designing with LITELINK, including
application notes and reference designs that already
meet all applicable regulatory requirements. LITELINK
data sheets also contains additional application and
design information. See the following links:
LITELINK datasheets and reference designs
Application note AN-117
and Ring Detect Voltage Threshold
Application note AN-146,
LITELINK Designs
Application note AN-155
Display Feature Signal Routing and Applications
14
Customize Caller ID Gain
Understanding LITELINK
Guidelines for Effective
www.clare.com
The information provided in this document is intended
to inform the equipment designer but it is not sufficient
to assure proper system design or regulatory
compliance. Since it is the equipment manufacturer's
responsibility to have their equipment properly
designed to conform to all relevant regulations,
designers using LITELINK are advised to carefully
verify that their end-product design complies with all
applicable safety, EMC, and other relevant standards
and regulations. Semiconductor components are not
rated to withstand electrical overstress or electrostatic
discharges resulting from inadequate protection
measures at the board or system level.
Rev. 1.0